Author Topic: Ready made, inexpensive 50" wide cutting guide for plasma/or torch cutting  (Read 2214 times)

Offline PTsideshow

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2570
  • Country: us



While working on the mod's to the kids smoker had to do some edge to edge cutting of 1/8" sheet. Using the 8 foot aluminum yard stick takes two people to get it set up. While I was picking up HF version of the adjustable C welding clamp yesterday I came across the above. So with my trusting 25% off coupon photo on my phone I picked up one. For thin stock it will require something to keep the pads from sliding past the edge of the metal. Has a very nice edge for cutting the width of sheets. And they come in a 24" length, so you can use one in the shop and not have 30" hanging off the edge.

 :dremel:
"The internet just a figment, of my imagination!' 
 
 There are only 3 things I can't do!"
Raise the Dead!
        Walk on water!
                 Fix a broken heart!
and I'm working on the first two!
glen