Author Topic: X1L  (Read 2214 times)

Offline DavidA

  • Hero Member
  • *****
  • Posts: 1219
  • Country: gb
X1L
« on: May 17, 2015, 04:54:50 PM »
Should the top (motor + casing) be solid or should it move slightly  relative to the quill ?

Dave. :scratch:

Offline chipenter

  • Hero Member
  • *****
  • Posts: 909
  • Country: gb
Re: X1L
« Reply #1 on: May 18, 2015, 02:02:34 AM »
The casing should be clamped to the quill by two 6mm cap head screws under the casing , but the quill can move if not adjusted by the 8mm cap head in front of the handle that clamps the split together on the front , adjust untill the head rises smoothly against the spring .
Jeff