Author Topic: Bigger shocks with a bit of "negative camber"  (Read 2437 times)

Offline doubleboost

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 1621
  • Country: gb
  • Newcastle Upon Tyne
Bigger shocks with a bit of "negative camber"
« on: October 17, 2015, 04:58:18 PM »
Ford Focus mk1 uprights modified for rally use









Offline micktoon

  • Hero Member
  • *****
  • Posts: 797
  • Country: gb
Re: Bigger shocks with a bit of "negative camber"
« Reply #1 on: October 17, 2015, 05:59:14 PM »
Hi John , looks like that angle plate did the job then  :thumbup:, hope it was easier than you thought  :clap:

 Cheers Mick

Online awemawson

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 5554
  • Country: gb
  • East Sussex, UK
Re: Bigger shocks with a bit of "negative camber"
« Reply #2 on: October 17, 2015, 06:02:05 PM »
Classic case of the setting up taking ten times as long as the machining I reckon 
Andrew Mawson
East Sussex

Offline doubleboost

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 1621
  • Country: gb
  • Newcastle Upon Tyne
Re: Bigger shocks with a bit of "negative camber"
« Reply #3 on: October 17, 2015, 06:11:12 PM »
The adjustable angle plate made the set up not too bad
I was going to tilt the head on the mill
I was on about 1 hour setting it up
John

Offline krv3000

  • Hero Member
  • *****
  • Posts: 1945
  • Country: gb
Re: Bigger shocks with a bit of "negative camber"
« Reply #4 on: October 17, 2015, 07:05:48 PM »
good one john

Offline tom osselton

  • Hero Member
  • *****
  • Posts: 851
  • Country: ca
Re: Bigger shocks with a bit of "negative camber"
« Reply #5 on: October 17, 2015, 08:30:36 PM »
Nice angle plate ( another thing to buy )