Author Topic: How do I... use igaging readers with this DRO (see pic)  (Read 2394 times)

Offline wannasteam

  • Jr. Member
  • **
  • Posts: 6
How do I... use igaging readers with this DRO (see pic)
« on: November 25, 2015, 04:09:46 AM »
Hi all

I used to have all three readers of this DRO on my mill but over time, the readers got messed up by lubricant, swarf etc.  I replaced the X and Y with the Igaging units but left the Y one as it was still in good nick.

Seems a waste of a perfectly good DRO with just the Y axis on it soooo...Can I somehow hack the cables so the Igaging units will work with my DRO? Don't know about protocols and stuff but I can join wires together pretty good.

Thanks in advance

Joe