« previous next »
Pages: [1]   Go Down

Author Topic: Aussie shaper  (Read 2782 times)

Offline JD

  • Full Member
  • ***
  • Posts: 154
  • Country: england
  • Gosport Hampshire UK
Aussie shaper
« on: January 02, 2016, 09:44:17 AM »
Gents off the back of my previous post the rexman lathe came a shaper also Australian in origin.
Came from the same source my G.P. fathers estate.
Asking for the same again any info would be helpful.
Cheers John.
Logged
If you cant fix it hit it with a bigger hammer

Offline RGS

  • Newbie
  • *
  • Posts: 4
  • Country: us
Re: Aussie shaper
« Reply #1 on: January 08, 2016, 12:42:10 AM »
It looks like a Atlas 7B with a different label.  They did make one under the Acorn brand in England.

http://www.lathes.co.uk/atlasshaper/
Logged

Offline JD

  • Full Member
  • ***
  • Posts: 154
  • Country: england
  • Gosport Hampshire UK
Re: Aussie shaper
« Reply #2 on: January 11, 2016, 02:36:00 PM »
RGS thanks for the info, I have been through the Lathes web site but never made the connection.
John
Logged
If you cant fix it hit it with a bigger hammer
Pages: [1]   Go Up
« previous next »