Author Topic: Small dia studding  (Read 6337 times)

Offline Darren

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 3800
  • N/Wales
Small dia studding
« on: May 05, 2009, 05:43:13 AM »
I found this, it has been mentioned that it can be hard to find in small dia

M2 studding

http://cgi.ebay.co.uk/M2-x-250-mm-STAINLESS-STEEL-ALLTHREAD-STUDDING-4-PACK_W0QQitemZ150245456427QQcmdZViewItemQQptZUK_DIY_Material_Nails_Fixing_MJ?hash=item150245456427&_trksid=p3911.c0.m14&_trkparms=72%3A1690|66%3A2|65%3A12|39%3A1|240%3A1318|301%3A1|293%3A1|294%3A50
You will find it a distinct help… if you know and look as if you know what you are doing. (IRS training manual)

bogstandard

  • Guest
Re: Small dia studding
« Reply #1 on: May 05, 2009, 06:04:39 AM »
Darren,

Not that it is difficult to find, but usually very expensive the smaller you get.

So much so, I have just bought half his stock, plus some 3mm as well.

Thanks for the link.

Bogs

Offline Darren

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 3800
  • N/Wales
Re: Small dia studding
« Reply #2 on: May 05, 2009, 06:25:36 AM »
I know you like to keep some stock in, but even so, he has an awful lot listed.... :ddb: :ddb: :ddb:

1500 M3 studding and that's per pack of four, I make that 6,000 left.....wot you gonna do with 6,000 M3 allthreads John....


Just pulling on ya  :lol:

His other stock seems cheap too, M3 x 16 STAINLESS CAP HEAD ALLEN BOLTS 500 BULK PACK at 13 quid  :bugeye:
And there is plenty more,

Maybe a bulk buy and split between us (as a group I mean), I doubt even you want 500 of everything.....but then with 6,000 allthreads I could be wrong  :lol: :lol: :lol: :lol: :lol:

All in jest John, all in jest....
« Last Edit: May 05, 2009, 06:27:22 AM by Darren »
You will find it a distinct help… if you know and look as if you know what you are doing. (IRS training manual)

Online sbwhart

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3487
  • Country: gb
  • Smile, Be Happy, Have Fun and Rock Until you Drop
Re: Small dia studding
« Reply #3 on: May 05, 2009, 06:27:22 AM »
Nice Link Darren

I've just bought whats left of his stock after John was finished with them  :lol:

Only jokeing but I have bought some M2 high tensile grub screws to hold the eccentrics for my loco, I've a fealing I will have to remake the crank axle so that the eccentrics don't slip not to happy with what I've got  :(:-  we will see.

Cheers

Stew
A little bit of clearance never got in the road
 :wave:

Location:- Crewe Cheshire

Offline HS93

  • In Memoriam
  • Hero Member
  • *****
  • Posts: 788
  • Country: gb
Re: Small dia studding
« Reply #4 on: May 05, 2009, 07:32:53 AM »
He is a great chap to deal with very fast delivery and very fair on postage, and does not mind small orders , a lot of his bolts include postage so you know how much its going to cost for just a few grub screws, when i did the mill conversion I used his bolts in case I use any coolant , they will stay shinney

Peter


Ps Is that why they say Bogs is a bit of a stud  :lol:  :ddb: :lol:  :ddb:
« Last Edit: May 05, 2009, 07:37:22 AM by HS93 »
I am usless at metalwork, Oh and cannot spell either . failure

Baldrocker

  • Guest
Re: Small dia studding
« Reply #5 on: May 05, 2009, 08:29:29 AM »
Got to agree about the service and price dealt with him for a fair while
now usually bulk packs, find that the price including postage to Oz
more than fair.
BR

Offline GeorgeGreek

  • Jr. Member
  • **
  • Posts: 25
Re: Small dia studding
« Reply #6 on: June 02, 2010, 06:35:23 PM »
Hi people,

regarding "small" diam. studding, i.e. 1mm 1.2mm e.t.c. at reasonable prices but rather costly at handling and shipping from Germany my personal suppliers are Messrs http://www.afv-model.com/4711shop/index.php?cat=c232_Threaded-rod.html

George

Offline johnuk6

  • Jr. Member
  • **
  • Posts: 11
    • Handmade Morse Keys
Re: Small dia studding
« Reply #7 on: June 27, 2010, 06:05:43 PM »
I bought some m6 brass studding from him in January but apparently it got lost in the post but to be fair I contacted him and he sent me some more, personally I think it was never posted probably due to the number of sales he has, I found out later that the firm is only 5 miles from were I live the chances of my order being lost in the post travelling that distance is remote, look at all the negative feedback he has.
I’m not saying you should not use him as some of you have had no problems maybe I was just unlucky.  ::)

Offline wheeltapper

  • Sr. Member
  • ****
  • Posts: 339
  • Country: gb
  • Spixworth Norfolk
Re: Small dia studding
« Reply #8 on: June 28, 2010, 08:49:13 AM »
I thought this looked interesting so I followed the link only to find it's the guy I've been using since I started this hobby.
I've never had any bother with him at all.

Roy
I used to be confused, now I just don't know.