I have a problem, the E switch on my lathe (chester comet) has stopped working.
I've tested the switch and it works OK so the problem is in the electronics somewhere.
instead of just wiring the switch in the mains they ran the wires into the rear electronics box, if I make and break one pair I hear a relay, the other pair does nowt.
I can't get to the rear box, a lathe isn't something I can just turn round,so I've ordered a new switch and I will mount it on the front and wire it straight into the power.
now the question, do I wire it BEFORE the panel switch or AFTER??
before someone asks " why don't I use the original switch" it's crap!
thanks for any help.