Author Topic: home made mill  (Read 14781 times)

Offline mattinker

  • Hero Member
  • *****
  • Posts: 980
  • Country: fr
Re: home made mill
« Reply #100 on: March 04, 2017, 12:23:27 AM »
rather make me own

I completely understand, this is all about making things!! :thumbup:

All the best, Matthew

Offline krv3000

  • Hero Member
  • *****
  • Posts: 1917
  • Country: gb
Re: home made mill
« Reply #101 on: March 04, 2017, 02:32:19 AM »
well i started thisd post on the mill for two resons furst off ther is plenty of bench top mills out ther but they all have problems i don.t need a big mill as you can see by the pics of my work place i have plenty of big toys to play with the second reson is watt can be a cheved in a home workshop with not a lot of spear cash. a long time a go you cud by mill kits dezined to be made at home to be fiteed on to lathes
if you have the cash you can by out but not all have a desposabal incum and yep things have becum much cheeper and a lot of things that once was made at home are gnaw got on line but if you only need two why by 10  but thats just me 

Offline micktoon

  • Hero Member
  • *****
  • Posts: 796
  • Country: gb
Re: home made mill
« Reply #102 on: March 04, 2017, 06:12:48 PM »
 Hi Bob , if you only need two why buy ten ........................ do you think that about drill bits too then  :clap: :thumbup: :lol:
  Cheers Mick

Offline krv3000

  • Hero Member
  • *****
  • Posts: 1917
  • Country: gb
Re: home made mill
« Reply #103 on: March 05, 2017, 05:48:08 PM »
lol no I will  snap 9 of them

Offline krv3000

  • Hero Member
  • *****
  • Posts: 1917
  • Country: gb
Re: home made mill
« Reply #104 on: March 05, 2017, 05:50:00 PM »
hi I must say sorry for my rant on sat was having a bad day so please forgive and give me a slap 

Offline micktoon

  • Hero Member
  • *****
  • Posts: 796
  • Country: gb
Re: home made mill
« Reply #105 on: March 05, 2017, 06:48:24 PM »
 Don't worry about your rant Bob............... but me and John will give you a good slap on Wednesday anyway lol  :poke: :thumbup:
  Cheers Mick

Offline chipenter

  • Hero Member
  • *****
  • Posts: 683
  • Country: gb
Re: home made mill
« Reply #106 on: March 06, 2017, 02:27:32 AM »
It was a poke at your houry rate and making a profit at 25P an houre , I am sorry that you took it the wrong way .
Jeff

Offline krv3000

  • Hero Member
  • *****
  • Posts: 1917
  • Country: gb
Re: home made mill
« Reply #107 on: March 06, 2017, 02:42:45 PM »
hi chip let me apologize I got out the rong side of the bed the dog bit me the wife bunt me toast broke me best coffee cup the receptionist at work witch I have having my wicked way with told me she is pregnant ? don't no haw as I have the two bricks sterilisation er your not her boy friend are you ???  so its all my folt   and you can hit me with a big stick  :wack:

Offline chipenter

  • Hero Member
  • *****
  • Posts: 683
  • Country: gb
Re: home made mill
« Reply #108 on: March 06, 2017, 03:27:47 PM »
                                 so its all my folt   and you can hit me with a big stick

OO S&M now your talking  :palm: I am 12 miles form the Channel tunnel , I can't find a stick long enugh   :offtopic:.
Jeff

Offline krv3000

  • Hero Member
  • *****
  • Posts: 1917
  • Country: gb
Re: home made mill
« Reply #109 on: March 06, 2017, 04:14:07 PM »
its ok I will make a helicopter and fly there     :)

Offline krv3000

  • Hero Member
  • *****
  • Posts: 1917
  • Country: gb
Re: home made mill
« Reply #110 on: July 03, 2017, 04:11:52 PM »
hi all just an up date the mill ant moved on much its all up and running still a lot to do I got the d.r.o kit at the model show I got sum way covering  just no time to start and finish it  on a different  there was a mill head the same as mine up for sale at the show and they wanted a woping 800 and something  :bugeye: any way  im going  to get john over to do a vid of it so far 

Offline vtsteam

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4839
  • Country: us
  • Republic of Vermont
    • www. sredmond.com
Re: home made mill
« Reply #111 on: July 03, 2017, 06:50:37 PM »
Looking forward to it, Bob!  :beer:
I love it when a Plan B comes together!
Steve
www.sredmond.com