Author Topic: Unknown logotype on a vise  (Read 993 times)

Offline MadModder

  • Jr. Member
  • **
  • Posts: 20
  • Country: se
    • The Mad Modders
Unknown logotype on a vise
« on: October 15, 2016, 09:33:58 AM »
A friend bought an old rusty vise he's fixing right now. There is this logotype on it. Does anybody recognise it?
« Last Edit: October 15, 2016, 12:18:31 PM by MadModder »
Don't turn it on, take it apart!

Offline sparky961

  • Hero Member
  • *****
  • Posts: 797
  • Country: ca
Re: Unknown logotype on a vise
« Reply #1 on: October 15, 2016, 10:29:13 AM »
I'm sure after I post this someone's going to chime in with "Hey, that's a ______ vice!", but I thought I'd take a few minutes with Google Images and see if I couldn't pull off a miracle.  No luck.

What I can suggest though, is that you also post some pictures of the entire unit.  That would help greatly with the identification - if there isn't anyone that can recognize it just by the logo.
« Last Edit: October 15, 2016, 09:06:13 PM by sparky961 »

Offline MadModder

  • Jr. Member
  • **
  • Posts: 20
  • Country: se
    • The Mad Modders
Re: Unknown logotype on a vise
« Reply #2 on: October 15, 2016, 12:26:31 PM »
Yes, of course.
One before-picture, and one of it in pieces all cleaned up with the wire weel.

[edit]
Right. Vice. I guess the US spelling got stuck there for me. Hehe.
« Last Edit: October 16, 2016, 05:53:47 AM by MadModder »
Don't turn it on, take it apart!

Offline rogprov

  • Jr. Member
  • **
  • Posts: 7
  • Country: gb
Re: Unknown logotype on a vise
« Reply #3 on: October 15, 2016, 01:36:05 PM »
Try asking your question on http://www.ukworkshop.co.uk/

They are very good at identifying logos.

Roger