Author Topic: Making chips on a weekend  (Read 970 times)

Offline Scuba1

  • Sr. Member
  • ****
  • Posts: 251
  • Country: us
Making chips on a weekend
« on: October 21, 2016, 08:27:17 PM »
Just built a couple of AR 15's From 80% lower receivers and assorted bits. Both identical with 18 inch stainless heavy profile free floated barrels chambered in .223 Wylde. Key mod hand guards and full stocks. Took me about 4 hours to mill out the receivers and 4 more to put it all together. Got another couple of billets ready to mill out but not sure what I am going to build them up to. Maybe one shorty and a 20 inch side charger, but the jury is still out on that. May even build one in 6.5 grendel.



ATB

Michael
Skype: scuba-1