The Breakroom > The Water Cooler
Drill Doctor
RobWilson:
Hi Lads
Any of you chaps have ,use a Drill Doctor ? good ? crap ?
Rob
sbwhart:
Hi Rob
I have a drill doctor it's a nice bit of kit does a good job, but if you can re grind a drill by hand and only have an occasional need to sharpen a drill you have to ? The expense
Sy
John Rudd:
Rob,
I have one of these....
http://www.sealey.co.uk/PLPageBuilder.asp?id=20&method=mViewProduct&productid=17453
This what you mean?
Good for drills from 1/8 upwards...
Spent over an hour sharpening all my twist drills..... :dremel:
RobWilson:
--- Quote from: sbwhart on November 16, 2016, 04:47:10 PM --- Hi Rob
I have a drill doctor it's a nice bit of kit does a good job, but if you can re grind a drill by hand and only have an occasional need to sharpen a drill you have to ? The expense
Sy
--- End quote ---
Hi Stew
Its mainly for smaller drill bits Stew ,say under 5mm , my eyes seam to be a bit naff at the moment ,(must go for an eye test) , I am fine grinding 6mm and above by hand no problem , its just the smaller sizes :palm:
Cheers Rob
RobWilson:
--- Quote from: John Rudd on November 16, 2016, 04:57:35 PM ---Rob,
I have one of these....
http://www.sealey.co.uk/PLPageBuilder.asp?id=20&method=mViewProduct&productid=17453
This what you mean?
Good for drills from 1/8 upwards...
Spent over an hour sharpening all my twist drills..... :dremel:
--- End quote ---
Any chance you could bring it North next time your up John ,just so I can give it a test drive :dremel:
Rob
Navigation
[0] Message Index
[#] Next page
Go to full version