Login with username, password and session length
Spread the word! New members welcome!
Topic: Greetings (Read 328 times)
January 17, 2017, 02:20:12 PM »
Hello to all of you. I have just joined
. I am a novice when it comes to lathes and milling machines. I have a MyFord ML7 lathe (slightly older than I am) and a Chinese milling machine. I have just fitted a DRO to the lathe and am in the process of doing the same to the mill (although this is a bit more challenging).
I am looking forward to learning a lot from all the learned member here
Never give up!!
Reply #1 on:
January 17, 2017, 04:02:06 PM »
Nice to have you here.
Lots to be learned here, even if we can't always agree on what is the correct way of doing things.
Reply #2 on:
January 17, 2017, 05:03:06 PM »
hi and welcume
Reply #3 on:
January 17, 2017, 05:11:02 PM »
WELCOME AND enjoy the chat
Reply #4 on:
January 19, 2017, 01:49:46 PM »
Hi and Welcome to the asylum Johan .
East Sussex, UK
Reply #5 on:
February 20, 2017, 04:23:35 AM »
Happy to have you on board Johan
Lots of help and advice here - you just need to ask
SMF © 2016
Page created in 0.111 seconds with 18 queries.