Author Topic: Greetings  (Read 484 times)

Offline JohanVanRensburg

  • Newbie
  • *
  • Posts: 3
  • Country: za
Greetings
« on: January 17, 2017, 02:20:12 PM »
Hello to all of you. I have just joined :clap:. I am a novice when it comes to lathes and milling machines. I have a MyFord ML7 lathe (slightly older than I am) and a Chinese milling machine. I have just fitted a DRO to the lathe and am in the process of doing the same to the mill (although this is a bit more challenging).
I am looking forward to learning a lot from all the learned member here :headbang:
Never give up!!

Offline DavidA

  • Hero Member
  • *****
  • Posts: 1167
  • Country: gb
Re: Greetings
« Reply #1 on: January 17, 2017, 04:02:06 PM »
Hi Johan,

Nice to have you here.

Lots to be learned here, even if we can't always agree on what is the correct way of doing things.

Dave.

DavidA

Offline krv3000

  • Hero Member
  • *****
  • Posts: 1912
  • Country: gb
Re: Greetings
« Reply #2 on: January 17, 2017, 05:03:06 PM »
hi and welcume

Offline howsitwork?

  • Full Member
  • ***
  • Posts: 229
Re: Greetings
« Reply #3 on: January 17, 2017, 05:11:02 PM »
WELCOME AND enjoy the chat

Offline Biggles

  • Full Member
  • ***
  • Posts: 179
  • Country: gb
Re: Greetings
« Reply #4 on: January 19, 2017, 01:49:46 PM »
Hi and Welcome to the asylum Johan .  :hammer: :zap: :whip:

Offline awemawson

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 5284
  • Country: gb
  • East Sussex, UK
Re: Greetings
« Reply #5 on: February 20, 2017, 04:23:35 AM »
Happy to have you on board Johan  :thumbup:

Lots of help and advice here - you just need to ask
Andrew Mawson
East Sussex