Home Base > Introductions
Evening All
DaveS:
My second attempt at an introduction, I messed up the first back in December. I reside most days in a 8 x 12 shed at the bottom of the garden along with a mill and lathe from the far east. Both of which I'm modifying bits at time to my satisfaction, those of you who have these machines will know what I mean. I'll try to remember some photos tomorrow.
Those of you in the far north have the Northern Lights but over the last few weeks I have sighted flashes of Plasma light to the east and today a Boom travelling at the speed of air from the same direction across the border.
Apologies in advance Andrew
Dave Spicer
awemawson:
Dave welcome aboard, I'm glad that the flashes and flying debris all missed you :lol:
Now you need to expand this thread with tales of what you get up to in this shed at the bottom of the garden, and why you've been banished there :clap:
DaveS:
Westerly view of my 8 x 12 refuge. These are the two machines responsible for most of the swarf and scrap along with a ML7 prior to the green meanie.
Main successes include a Cut off saw along the design by Myford Boy, A Stuart S50 from castings and about 2/3 way through a Stothert & Pitt Beam engine also from castings.
Modifications have made to the mill by adding DRO and a lubrication system.
Lots of other small stuff but I can't remember of the top of head. Better sign off now to see if the photos are regulation size
Dave
seadog:
I think you could make them larger :D
krv3000:
hi and welcume
Navigation
[0] Message Index
[#] Next page
Go to full version