Author Topic: Unimat PC drive pulley  (Read 464 times)

Offline proplineruk

  • Newbie
  • *
  • Posts: 1
Unimat PC drive pulley
« on: March 27, 2017, 03:42:36 PM »
Hi all can one of you help me please, I have a Unimat PC lathe that does not have a drive pulley, this part is no longer made, so does anyone have a spare they want to sell , OR anyone who has this machine can they measure the drive pulley and send me the dimensions so I can get one made, as without a drive pulley its as much use as a chocolate teapot, any help you can give would be much appreciated.

Offline MetalMagus

  • Jr. Member
  • **
  • Posts: 23
  • Country: gb
Re: Unimat PC drive pulley
« Reply #1 on: March 28, 2017, 07:17:57 AM »
Have you tried Ebay. I did a quick search a found a couple of pulleys for the PC lathe.

Only issue they were in the USA, But it's a small part so shipping may not be too excessive.

http://www.ebay.co.uk/itm/Emco-Unimat-Basic-PC-Lathe-Spindle-Gear-Pulley-Compression-Spring-0410-/262081355224?hash=item3d05441dd8:g:xkEAAOSw9N1VvtTO

The pulleys were selling at around 15.

Cheers

Sean

Offline efrench

  • Full Member
  • ***
  • Posts: 108
Re: Unimat PC drive pulley
« Reply #2 on: March 28, 2017, 01:35:38 PM »
A 3d printed one would probably work fine.