Author Topic: Hi all  (Read 518 times)

Offline Ben

  • Jr. Member
  • **
  • Posts: 8
Hi all
« on: April 05, 2017, 03:44:10 PM »
I have recently acquired a lathe, or two, seem to have grown to three now.

Which is a little company for my mini mill and grinder.  Did I mention the shaper, another must have item.

All this has given me a good excuse to turn perfectly good metal into swarf.




Offline awemawson

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 5525
  • Country: gb
  • East Sussex, UK
Re: Hi all
« Reply #1 on: April 05, 2017, 04:22:54 PM »
Hi Ben, welcome to the forum   :wave:

I see from your other posting that you might join us on the Scraping Course in December at my place - that would be good  :thumbup:
Andrew Mawson
East Sussex

Offline mexican jon

  • Full Member
  • ***
  • Posts: 191
  • Country: england
Re: Hi all
« Reply #2 on: April 05, 2017, 04:43:59 PM »
 :wave: :wave: Hi Ben
People say you only live once ! I say thank F@*K can't afford to do it twice.

Offline krv3000

  • Hero Member
  • *****
  • Posts: 1936
  • Country: gb
Re: Hi all
« Reply #3 on: April 05, 2017, 06:54:17 PM »
Welcome a board David

Offline Biggles

  • Full Member
  • ***
  • Posts: 208
  • Country: gb
Re: Hi all
« Reply #4 on: April 06, 2017, 12:00:02 AM »
Welcome Ben.  :wave:

Offline Ben

  • Jr. Member
  • **
  • Posts: 8
Re: Hi all
« Reply #5 on: April 06, 2017, 02:42:45 AM »
Thanks for the welcome Andrew,jon,David ,Biggles

Andrew yes really looking forward to this

Ben

Offline howsitwork?

  • Sr. Member
  • ****
  • Posts: 258
Re: Hi all
« Reply #6 on: April 11, 2017, 07:13:56 AM »
Hi Ben

welcome from Yorkshire! Sadly December's too crowded for me already so I'll have to listen to you all getting blisters etc :drool:

Ian