The Shop > Tools
A DIY bandsaw for the shop !
Pigi:
I've published a new page for my blog that could be of interest.
http://pigi-machinering.blogspot.it/2017/05/a-diy-bandsaw-for-shop.html
Here the basic arrangement.
I hope I'm not violating any rule by publishing the link. As I told it's easier for me to keep everything inside a post.
If I'm violating I will try to arrange differently.
Cheers
Pigi
AdeV:
Very nice work! :thumbup: And a great write-up too.
Maybe a photo here of the finished article to inspire others to click the link? Just a suggestion...
Pigi:
Ade,
it seems a very good idea ! :doh:
Here she is ( finish "product" ):
Pigi
PekkaNF:
It looks very finished compared to my work....usually all the stuff I make takes few iterations and rebuilds and if it works fine it might get paint in about five years.
Pekka
Brass_Machine:
--- Quote from: AdeV on May 22, 2017, 09:20:19 AM ---Very nice work! :thumbup: And a great write-up too.
Maybe a photo here of the finished article to inspire others to click the link? Just a suggestion...
--- End quote ---
Links and videos are fine. But, Like Ade sates, a picture(s) and text help encourage people to look. And as we are a discussion board, be prepared for discussion here about the link.
Looks good!
Eric
Navigation
[0] Message Index
[#] Next page
Go to full version