Author Topic: Centec 2A vertical head help needed.  (Read 533 times)

Offline farmerjoe

  • Jr. Member
  • **
  • Posts: 10
Centec 2A vertical head help needed.
« on: May 31, 2017, 04:51:01 PM »
Hi guys,

Not really sure if this is the right place to put this but couldn't find a suitable section!

I recently picked up a nice Centec 2A with both vertical and horizontal heads.
Unfortunately on the journey home the handle on the spindle lock managed to rattle its way off and disappear.

I've started up making a replacement but I think there maybe more bits missing than I initially thought.

Could anyone owning a mill with a mk3 vertical head do me a huge favour and disassemble the spindle lock and lay it out and take a photo of it for me please?

Many thanks.
Joe

Offline farmerjoe

  • Jr. Member
  • **
  • Posts: 10
Re: Centec 2A vertical head help needed.
« Reply #1 on: June 21, 2017, 07:13:50 PM »
Anyone?

And I meant the lock for the quill, not the actual spindle!

Thanks.

Offline srp

  • Newbie
  • *
  • Posts: 3
Re: Centec 2A vertical head help needed.
« Reply #2 on: July 14, 2017, 04:52:18 PM »
Have you had any luck with this yet? If not I may be able to help - do you mean the small quill lock located at the bottom end of the casting, at the front of the head?