Author Topic: Spindle problem with cincinnati tool and cutter grinder 2 spindle  (Read 2361 times)

Online PekkaNF

  • Hero Member
  • *****
  • Posts: 1813
  • Country: fi
Re: Spindle problem with cincinnati tool and cutter grinder 2 spindle
« Reply #50 on: November 12, 2017, 03:44:57 AM »
I know your spindle is together now, here is a fascinating series of articles on the topic of spindle rebuilds.
https://highspeedtechnologies.com/category/how-to-replace-cnc-spindle-bearings/

Lots of your analysis is confirmed in the articles.

Gerrit

Thank you. That was a tully great find.

I went it trough twice and it looks very good. Very well writen and exceptionally informative, I would have saved a week of resercah and buggig of taltented mechnacial designer if I had this before I started. It does conform all I was told but it is more structured and better.

Still happy about my learning curve and these are the thigs you learn only by doing and studying.

Hope this helps if another amateur like me has to fix an odd spindle.

Pekka