The Shop > Tools
pottyengineering Clamping Drill
sbwhart:
Just completed this clamping drill.
You can clamp the complete unit to a large work piece the idea is that I can use it to drill the frame of the 5" loco i'm building giving me greater control of the drilling operation.
It just comprises of a windy drill/die grinder attached to a large toolmakers, it slides up and down the pillar via a lever mechanism.
=83541997&filters[recent]=1&sort=1&o=1t]http://s431.photobucket.com/user/sbwhart/media/DSC03045_zpstj9k3gzd.jpg.html?filters[user]=83541997&filters[recent]=1&sort=1&o=1t
Cheers
Stew
John Rudd:
Great idea Stu, another ' outside of the box' thought......
Btw, the pb link is faulty...... :scratch:
PekkaNF:
Drill is nice...somewhat like mag drill or somewhat I had to with table drill, turn head back and clamp over large part, because that part would not fit into throat.
You just need to copy/paste the whole link...
=83541997&filters[recent]=1&sort=1&o=1]http://s431.photobucket.com/user/sbwhart/media/DSC03045_zpstj9k3gzd.jpg.html?filters[user]=83541997&filters[recent]=1&sort=1&o=1
Board SW seems to cut too long links or something.
mattinker:
Nice idea worth copying!!
Regards, Matthew
John Rudd:
--- Quote from: PekkaNF on September 21, 2017, 06:52:52 AM ---Drill is nice...somewhat like mag drill or somewhat I had to with table drill, turn head back and clamp over large part, because that part would not fit into throat.
You just need to copy/paste the whole link...
=83541997&filters[recent]=1&sort=1&o=1]http://s431.photobucket.com/user/sbwhart/media/DSC03045_zpstj9k3gzd.jpg.html?filters[user]=83541997&filters[recent]=1&sort=1&o=1
Board SW seems to cut too long links or something.
--- End quote ---
Ahh is that what it is...? :scratch:
My apologies to Stu.... :bow:
Navigation
[0] Message Index
[#] Next page
Go to full version