Gallery, Projects and General > How do I??

help: old brook crompton motor wire colours for star

(1/2) > >>

Andrew Wildman:
Hi All,
I am completing my grinder and I am wiring it for 415v (star).  The previous owner had it wired delta for 240v.
Having looked at it I think it should be connected:

red - terminal a
yellow - terminal b
blue - terminal c
black, white, brown - neutral

(I realise I may have to swap the individual wires to terminals a,b or c to get the motor rotating in the correct direction)

Can somebody check whether this is usual convention

Thank you!  :mmr:

philf:
Andrew:

Craynerd posted a photo some time ago which tallies exactly with what you're proposing:



Phil.

Andrew Wildman:
thanks.
I have also checked that all the windings are connected to the start point (ie no winding has both end going to neutral) so I think it is ok...
let's plug it in and see if the magic smoke stays in :)

hermetic:
You do know that you do not connect a neutral to the N connection on three phase. This is just a blind bolt to connect the three winding ends together when using the star connection. You can take a neutral FROM here and use one other phase connection to get a single phase feed.

Andrew Wildman:
thanks all.  Motor working fine!

hermetic, yep its just a star point

Navigation

[0] Message Index

[#] Next page