Author Topic: rev cawnter  (Read 4003 times)

Offline krv3000

  • Hero Member
  • *****
  • Posts: 2183
  • Country: gb
rev cawnter
« on: November 12, 2017, 06:25:42 PM »
hi I got this of john sum time back it needed my loving touch in all it was ok the box on the other hand was dropping to bits   any way striped it all out and put it back together the box well I got it all back together but as not happy with the out side I have tried before to get the fabric covering that's not just on this type of box but its the same that's on mike boxes to with no goy  any way I got sum velvet type covering sticky back plastic type to cover it with right pics

Offline russ57

  • Sr. Member
  • ****
  • Posts: 278
Re: rev cawnter
« Reply #1 on: November 14, 2017, 07:09:58 AM »
Nice...
Do you need to recalibrate after a rebuild like this?

-russ


Offline krv3000

  • Hero Member
  • *****
  • Posts: 2183
  • Country: gb
Re: rev cawnter
« Reply #2 on: November 15, 2017, 04:36:17 PM »
yep did it at work

Offline Meldonmech

  • Hero Member
  • *****
  • Posts: 933
Re: rev cawnter
« Reply #3 on: November 19, 2017, 09:41:14 AM »
 
 Hi Bob

                 Nice work, I like the case restoration. What solvent do you use in your ultrasonic cleaner ?

                                      Cheers David

Offline krv3000

  • Hero Member
  • *****
  • Posts: 2183
  • Country: gb
Re: rev cawnter
« Reply #4 on: November 19, 2017, 03:21:23 PM »
hi I get it from work I did post the name of it sum time back you will have to look threw me old post but don't think you will be able to by it as its industrial grade   

Offline Meldonmech

  • Hero Member
  • *****
  • Posts: 933
Re: rev cawnter
« Reply #5 on: November 21, 2017, 02:48:10 PM »
 
 Hi Bob

                     Thanks for your reply

                                                        Cheers David