Author Topic: NickG's Rocking Engine  (Read 3904 times)

Offline NickG

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 1890
NickG's Rocking Engine
« on: September 22, 2009, 07:11:23 PM »
Hi all,

Not sure whether this is the right place for these. I've tweaked all the drawings for my rocking engine in line with my findings so am posting on here incase anybody else wants a go or even just for info or any ideas. They need to be attached really as would be too little on photobucket, they are only circa 80k each though.

Cheers,

Nick
Location: County Durham (North East England)

Offline NickG

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 1890
Re: NickG's Rocking Engine
« Reply #1 on: September 22, 2009, 07:12:41 PM »
Next ones
Location: County Durham (North East England)

Offline NickG

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 1890
Re: NickG's Rocking Engine
« Reply #2 on: September 22, 2009, 07:14:19 PM »
and the rest
Location: County Durham (North East England)

Offline chuck foster

  • Sr. Member
  • ****
  • Posts: 334
  • Country: ca
Re: NickG's Rocking Engine
« Reply #3 on: September 22, 2009, 09:24:26 PM »
thanks you very much for the plans nick  :thumbup: :thumbup: ..............it is now on my list of things to make  :dremel: ...............oh boy is that a long list  :doh:

thanks again
                  chuck :wave:
hitting and missing all the way :)

skype:  aermotor8

former hmem member

Offline sbwhart

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3490
  • Country: gb
  • Smile, Be Happy, Have Fun and Rock Until you Drop
Re: NickG's Rocking Engine
« Reply #4 on: September 23, 2009, 01:28:48 AM »
Nice set of plans Nick:- very clear

 :beer:
Stew
A little bit of clearance never got in the road
 :wave:

Location:- Crewe Cheshire

Offline NickG

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 1890
Re: NickG's Rocking Engine
« Reply #5 on: September 23, 2009, 03:46:04 AM »
Cheers,

I'd get a slating if I showed these to the lads at work .. they'd have red pen all over them, but they're probably good enough for us. If anybody does pick them up one day and sees anything I've missed, let me know!

Nick
Location: County Durham (North East England)

Offline sbwhart

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3490
  • Country: gb
  • Smile, Be Happy, Have Fun and Rock Until you Drop
Re: NickG's Rocking Engine
« Reply #6 on: September 23, 2009, 03:07:16 PM »
Nick

I've found with drawings like a lot of things in life that are open to interpertation, you'll always find someone who'll say they are wrong, if you're happy with them then they a right.  :thumbup:

A Darn good job  :thumbup:

Stew
A little bit of clearance never got in the road
 :wave:

Location:- Crewe Cheshire

bogstandard

  • Guest
Re: NickG's Rocking Engine
« Reply #7 on: September 23, 2009, 03:16:25 PM »
Nice job Nick.

I have compiled all your files into one PDF file so it is a lot easier to download.


John

Offline NickG

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 1890
Re: NickG's Rocking Engine
« Reply #8 on: September 23, 2009, 03:29:14 PM »
Thanks John, will save that myself, I don't have the software for that, I don't think!
Location: County Durham (North East England)

bogstandard

  • Guest
Re: NickG's Rocking Engine
« Reply #9 on: September 23, 2009, 06:48:10 PM »
Nick,

You can download a free Adobe Reader, just do a search on the net.

John

Offline NickG

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 1890
Re: NickG's Rocking Engine
« Reply #10 on: September 24, 2009, 04:04:15 PM »
John,

I've got the reader but I don't think that allows you to compile stuff like you did does it? Did you use adobe full version?

Nick
Location: County Durham (North East England)

bogstandard

  • Guest
Re: NickG's Rocking Engine
« Reply #11 on: September 24, 2009, 05:11:12 PM »
Sorry about that Nick, I thought you just wanted to read it.

I run the full version of Adobe Acrobat 8 Pro, and it allows you to do almost anything to any document or picture. About 10 seconds to compile those into one file. But you can get PDF file compilers on the net to do just that one job.


John