Author Topic: Came across one of these yesterday looks quite cool and handy!  (Read 4183 times)

Offline bry1975

  • Sr. Member
  • ****
  • Posts: 417
  • Country: gb
    • http://www.satintime.co.uk
Came across one of these yesterday looks quite cool and handy
anyone know what it is?  :D


Offline wheeltapper

  • Sr. Member
  • ****
  • Posts: 345
  • Country: gb
  • Spixworth Norfolk
Re: Came across one of these yesterday looks quite cool and handy!
« Reply #1 on: July 14, 2011, 08:04:05 AM »
It looks like it could be for threading bike spokes.

Roy
I used to be confused, now I just don't know.

Offline bry1975

  • Sr. Member
  • ****
  • Posts: 417
  • Country: gb
    • http://www.satintime.co.uk
Re: Came across one of these yesterday looks quite cool and handy!
« Reply #2 on: July 14, 2011, 08:55:59 AM »
Yep very correct it's a spoke thread roller.

Offline DMIOM

  • Hero Member
  • *****
  • Posts: 676
  • Country: gb
  • Isle of Man
Re: Came across one of these yesterday looks quite cool and handy!
« Reply #3 on: July 14, 2011, 09:16:03 AM »
Came across one of these yesterday looks quite cool and handy
anyone know what it is?  :D



Thread roller as illustrated here on MadModder by Bogs

Dave

Offline philf

  • Hero Member
  • *****
  • Posts: 1107
  • Country: gb
Re: Came across one of these yesterday looks quite cool and handy!
« Reply #4 on: July 15, 2011, 08:36:06 AM »
It looks as though you might have heads for different gauge spokes. (Possibly 13g, 14g, 15g.)

I have a similar machine with a head for rolling 14g (2.0mm) spokes but when I try to use it I get as many 2 start threads as I get single start.

I read somewhere that you need to chamfer the end of the spoke to stop this happening but it seems to make no difference. What does work is not to cut all the thread off the spoke and feed the existing thread into the rollers. This is OK if you only need to shorten the spoke by say 6mm but if you need to take more than the length of the original thread off it would very tedious.

It could be that the rolling head on mine is knackered with too much slop everywhere.

Does anyone know the secret of consistently producing single start threads?

Phil Fern
Location: Marple, Cheshire