Author Topic: Some bits from LMS  (Read 4262 times)

bogstandard

  • Guest
Some bits from LMS
« on: October 24, 2009, 06:17:59 PM »
If you are from the US I think that LMS have a few real good items on offer or for sale at this time.

I am lucky in that I have a friend who brings me stuff back from the US, but the exchange rate isn't good for us at the moment, but for you local guys, here are a few that I can really recommend.

I had one of these brought back a while ago, and if you have a bit of throat depth on your mill, it is a great tool. In fact it is dead easy to make shorter pins for those higher jobs on the RT. It is on special for a week. It is well worth downloading and watching the vid. It shows just how easy and quick it is to use. It is one of those tools that you might think of as a gimmick, but I can attest, it is far from it.

Coaxial Centering Indicator

http://littlemachineshop.com/products/weekly_special.php

There is no excuse for not having a milling vice backstop at this price. You will wonder how you ever lived without it.

Mill backstop

http://littlemachineshop.com/products/product_view.php?ProductID=3679&category=

For all those who crave accuracy, but are limited by the digivern, one of these can solve your problems. I use one where I want to accurately measure larger diameters and widths, which is where a digivern tends to start to lose it's accuracy.

Dial caliper

http://littlemachineshop.com/products/product_view.php?ProductID=3704&category=

This is another thing I use a lot. If the thought of the cost of a set of slips puts you off buying them, for the average machinist, these will work great, and are very well made indeed. I have two sets of precision slips, but for almost all jobs I use these, I find them much easier to handle.
Mine came in a blow moulded case, which I actually prefer.

Space block set

http://littlemachineshop.com/products/product_view.php?ProductID=1757&category=1962771978


I hope you found some of them interesting, and worth considering.


Bogs