Author Topic: New erection  (Read 9205 times)

Rob.Wilson

  • Guest
New erection
« on: April 24, 2010, 09:37:27 AM »
Hi Lads

When mooching around a scrap yard , i found just what i had been looking for , A 10' U bend ,8" tube  :) ,  only needing 1/2 of the U shape , i got it burnt up, stuck it in the van and off i went  , very happy with my lump of tube ,  the wife was less impressed with my new fined , as i came back from the yard with more junk than i had taken ,  :lol: :lol: :lol:

I had to cut the tube into three , cos even with viagra i would not get it up myself , just a tad heavy ,  any way its a chimney for my furnace , i have been messing about on and off for a year with my furnace getting it so i can run it in doors , the weather in the north of england is not the best .

Hope it works as i tend to melt more than the pot full of metal  ::)






Cheers Rob


« Last Edit: April 24, 2010, 09:40:29 AM by Rob.Wilson »

Rob.Wilson

  • Guest
Re: Furnace
« Reply #1 on: April 24, 2010, 04:09:06 PM »
Here is a shot of my furnace that i have been working on , what the chiney connect to  :)



Cheers Rob

Offline Brass_Machine

  • Administrator
  • Hero Member
  • *****
  • Posts: 5504
  • Country: us
Re: New erection
« Reply #2 on: April 24, 2010, 06:44:33 PM »
Nice work there Rob. That is a a beefy looking furnace. Did you make that too?

Eric
Science is fun.

We're all mad here. I'm mad. You're mad.

Offline Darren

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 3795
  • N/Wales
Re: New erection
« Reply #3 on: April 24, 2010, 07:22:51 PM »
Did you weld those numbers on Rob?

Very methodical  :smart:
You will find it a distinct help… if you know and look as if you know what you are doing. (IRS training manual)

Offline Dean W

  • Hero Member
  • *****
  • Posts: 571
  • My kingdom for a lathe!
    • Projects web pages
Re: New erection
« Reply #4 on: April 24, 2010, 07:40:53 PM »
Gee, Rob, I wish you would do a job half cocked just once in a while, so the rest of us could feel a bit more adequate!
; )
; )

Very nice install job on the chimney.  Very nice looking "little" metal cooker you have there, too!
Thanks for the pics.

Dean
Dean W.

Shop Projects:
http://www.deansphotographica.com/machining/projects/projects.html

Praise the Lord and pass the Carbide!

Offline Darren

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 3795
  • N/Wales
Re: New erection
« Reply #5 on: April 24, 2010, 07:44:24 PM »
Gee, Rob, I wish you would do a job half cocked just once in a while, so the rest of us could feel a bit more adequate!
; )
; )





My thoughts exactly  :ddb:
You will find it a distinct help… if you know and look as if you know what you are doing. (IRS training manual)

Offline Artie

  • Sr. Member
  • ****
  • Posts: 293
  • Country: au
  • Down here in the Aussie sunshine/heat :-)
Re: New erection
« Reply #6 on: April 24, 2010, 09:45:45 PM »
Gee, Rob, I wish you would do a job half cocked just once in a while, so the rest of us could feel a bit more adequate!

Somehow I erally dont think THATS gonna happen anytime soon.. :bow: He does do grand work doesnt he..oh sorry Rob, shouldnt talk about you on your own thread.... Seriously mate I find your stuff an inspiration, thanks to you im looking for a shaper.

Had a meeting with the guy I share a shed with and he wanted to know just WHERE I would put it..... if we squeezed this mill over...move the lathe a little to the left..and ....

Rob T (as opposed to Rob W)
South Wales, wait...NEW South Wales... Batemans Bay.

Rob.Wilson

  • Guest
Re: New erection
« Reply #7 on: April 25, 2010, 08:54:47 AM »
Many thanks Lads , for your comments  :nrocks:

Hi Eric , i did make the furnace ,, done a quick post on it  http://madmodder.net/index.php?topic=3027.0

Hi Darren , yep i welded the numbers on ,and the date i stuck the thing up  ,,,,,,,,,,the things you do when your off work  ::)


Many thanks Rob


Offline GeorgeGreek

  • Jr. Member
  • **
  • Posts: 25
Re: New erection
« Reply #8 on: May 03, 2010, 09:12:22 AM »
Hi Rob,

I found your thread a complete dissapointment.

A 70 years old guy,

George

Offline Stilldrillin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4972
  • Country: gb
  • Staveley, Derbyshire. England.
Re: New erection
« Reply #9 on: May 03, 2010, 10:02:21 AM »
George,

He always makes me feel very inferior.......  ::)

David D
David.

Still drilling holes... Sometimes, in the right place!

Still modifying bits of metal... Occasionally, making an improvement!

Offline Artie

  • Sr. Member
  • ****
  • Posts: 293
  • Country: au
  • Down here in the Aussie sunshine/heat :-)
Re: New erection
« Reply #10 on: May 03, 2010, 02:17:49 PM »
Well..... at seventy...finding the thread about a new erection was really about a chimney, may well give you cause for dissapointment..... :) :lol:
South Wales, wait...NEW South Wales... Batemans Bay.

Rob.Wilson

  • Guest
Re: New erection
« Reply #11 on: May 03, 2010, 04:29:07 PM »
 :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: sorry George  :lol: :lol: :lol: :lol: :lol: :clap: :clap: :clap:
Hi Rob,

I found your thread a complete dissapointment.

A 70 years old guy,

George


Regards Rob  :thumbup: