Author Topic: If You Can Draw It In 3D, They Can Make It.  (Read 5227 times)

Offline dsquire

  • In Memoriam
  • Hero Member
  • *****
  • Posts: 2275
  • Country: ca
  • Kitchener, Ontario, Canada
If You Can Draw It In 3D, They Can Make It.
« on: May 09, 2010, 11:44:30 PM »
Hi Gang

While browsing another forum I came across an interesting subject. It is printing in 3D in plastics or Stainless Steel. Here is the link for it.

http://www.shapeways.com/

Check it out and look around the site. You can even get your own custom designed parts made at what appeared to me to be somewhat reasonable. 

Cheers  :beer:

Don
Good, better, best.
Never let it rest,
'til your good is better,
and your better best