DRO for 6x26

[russ57]

so, i've just order a DRO with 3 scales from the DRO store,  for my 6x26 'top tech DM15 mill. I need to tell them what size scales i want.  How/where do i measure?
General feeling i get is that in front of the bed is best for the X scale, to not lose Y travel. Any contrary opinions?

any other suggestions?

thanks

russ (oz)

[Xldevil]

Hello,Russ.
I guess I own a similar mill and went with Allendale for my glass scales.
I chose
GS500-120 Slim Glass Scale - 120mm Reading Length      
GS500-170 Slim Glass Scale - 170mm Reading Length      
GS500-370 Slim Glass Scale - 370mm Reading Length   
Ordered matching protective covers as well.

More or less it has been an easy installation,even for a plonker  like me.


 Z

X

Y
I hope the pics help.

Cheers,Ralph
   

[russ57]

Sure does Ralph.  Looks like you put the z_ on the quill?  I almost always use the knee,  I thought I might put a caliper on the quill eventually.  I've also asked the suppplier if has a recommendation.
-Russ

[HS93]

I found this site Handy for ideas


http://mtechdro.blogspot.co.uk/2007/08/faq-what-scale-length-will-suit-my.html

Peter

[russ57]

OK,  I've ordered 370 for x and z(w),  and 170 for y

next step, taking a drill to my pristine mill....

[russ57]

update: at Scotts (The DRO store) i've changed the X scale to 420, to make installation a little easier.