Simple how do I?

[-steves-]

Sure this one will be very straight forward, but what do I polish a casting with once I have machined it? I would like it all bright and shiney and have no idea where to start ...

Thanks
Steve

[saw]

Hi.
You have to begin with emery cloth. I use to begin with 600 then 800 and finish with 1000.
After that polishing disc with good polish. I use to end with carpolish so the finsh will remain a longer time. 

Good luck 

[-steves-]

Hi.
You have to begin with emery cloth. I use to begin with 600 then 800 and finish with 1000.
After that polishing disc with good polish. I use to end with carpolish so the finsh will remain a longer time. 

Good luck 

Just knew it had to be fairly straight forward, but until you ask, you just don't know.

Many thanks 

[saw]

Just ask, there is no such thing as a stupid question perhaps stupid answers 
Have a good day.