Author Topic: Gerhards hiding place????  (Read 10177 times)

Offline Gerhard Olivier

  • Sr. Member
  • ****
  • Posts: 314
Gerhards hiding place????
« on: January 13, 2009, 11:41:07 AM »
Hi all

New here just wanted to say hi.

After some guessing in the electronics section I was South African born but live in the UK.
I have a lathe and a mill used mostly to make the lathe and mill better/work again etc.

Started a stationary steam engine a year ago???? but still making the tools to finish it maybe 2022.

Gerhard
UK
Guernsey
Channel Islands

Offline Darren

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 3795
  • N/Wales
Re: Gerhards hiding place????
« Reply #1 on: January 13, 2009, 12:37:21 PM »
Welcome aboard Gerhard,

So you have been improving your machines, sounds interesting, please do tell us more... :dremel:
You will find it a distinct help… if you know and look as if you know what you are doing. (IRS training manual)

Offline Stilldrillin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4972
  • Country: gb
  • Staveley, Derbyshire. England.
Re: Gerhards hiding place????
« Reply #2 on: January 13, 2009, 01:02:39 PM »
Hi Gerhart!  :wave:

You`ll like it here.....  :thumbup:
David.

Still drilling holes... Sometimes, in the right place!

Still modifying bits of metal... Occasionally, making an improvement!

Offline Divided he ad

  • WARNING: LIKES SHINEY THINGS
  • The Collective
  • Hero Member
  • *****
  • Posts: 1950
  • Country: gb
  • Between Chester, Wrexham, ruthin & Holywell :-)
Re: Gerhards hiding place????
« Reply #3 on: January 13, 2009, 01:27:41 PM »
Hi Gerhard,

Welcome to the most informative and relaxed forum on the interweb.... Well I think it is :thumbup:  :mmr:


I'm sure your looking around, or have done for a while?

Post new topics and replys at will and remember there are no stupid questions.... A few daft and humorous answers though!!  :lol:

We can sure help you get that engine finished.... A few pic's in the right area and we'll encourage you all you need and help you if need be..... There's a lot of talented guys on here... And a few trying to be... (like me!)  :thumbup:


See you around the forum,



Ralph.
I know what I know and need to know more!!!

Offline sbwhart

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3530
  • Country: gb
  • Smile, Be Happy, Have Fun and Rock Until you Drop
Re: Gerhards hiding place????
« Reply #4 on: January 13, 2009, 01:43:59 PM »
Hi Gerhards

Welcome aboard, there's a wide range of interest here, if you've got a problem one or more of the chaps will be able to help you out, and i'm shure you'l be able to help us out like wise.
  :smart:

I'm into steam myselve my first model was a beam engine, ther's a photo of it some ware on the forum, when you've sorted yourselve out pictures of what you've been doing would be great. :thumbup:

Have :thumbup:

fun

Stew
A little bit of clearance never got in the road
 :wave:

Location:- Crewe Cheshire

Offline Gerhard Olivier

  • Sr. Member
  • ****
  • Posts: 314
Re: Gerhards hiding place????
« Reply #5 on: January 13, 2009, 04:05:36 PM »
I made a few modifications to the lathe -new topslide mount.
-two ball turning tools one that cuts horizontally around the centre and one that arcs up and over the centre.
-then I mounted the flex drive mini tool on the cross slide for cross drilling but now i have to mock up some sort of headstock dividing attachment????? Still in development.

I just like to make things mot all that fussed with wat it is.  Started woodwork (furnature making ) as a hobby in grade school and tool building is a progression from there.

These days life is to busy for big projects so just lots of tinkering.

Will post some pics of these once i have figured out where to put them.

Gerhard (saving my sanity a little at a time.) 
Guernsey
Channel Islands

bogstandard

  • Guest
Re: Gerhards hiding place????
« Reply #6 on: January 13, 2009, 04:12:51 PM »
Gerhard,

Quote
(saving my sanity a little at a time.)

Very sorry, that is no use at all. You have to be a full blown lunatic to live around here. :lol:

Bogs

Offline Gerhard Olivier

  • Sr. Member
  • ****
  • Posts: 314
Re: Gerhards hiding place????
« Reply #7 on: January 13, 2009, 04:47:58 PM »
How do u get some pics in here ???

Not as computer literate as I had hoped i was :(

Gerhard
Guernsey
Channel Islands

Offline rleete

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 534
  • Country: us
Re: Gerhards hiding place????
« Reply #8 on: January 13, 2009, 04:57:53 PM »
Read this post:  http://madmodder.net/index.php?topic=607.0

Step by step proceedure to follow.


Oh yeah, welcome!
Creating scrap, one part at a time

Offline Bernd

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 3688
  • Country: us
  • 1915 C Cab
    • Kingstone Model Works
Re: Gerhards hiding place????
« Reply #9 on: January 13, 2009, 06:44:12 PM »
Boy was I wrong about where you lived.  :scratch: Oh well.

Ya, what the other guys said, "Pictures". When you can please.  :clap:

Official welcome  :mmr:

Bernd
Route of the Black Diamonds

Offline SPiN Racing

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 506
Re: Gerhards hiding place????
« Reply #10 on: January 13, 2009, 10:06:14 PM »
Welcome to the forum!

Many many informative posts.
As I have said before.. Artists in metal here.
Not a shop ripping out 39284987 parts from a machine.

Granted I could think of a few things I would like to be able to buzz out a few thousand at a time.... :D

Post new topics and replys at will and remember there are no stupid questions

Dont feel bad :) I ask plenty of questions that boggle the more experienced machinists.
Im a complete novice.. but Im making shavings and learning as I go. SO I will be asking plenty of the hard questions.  :lol:

I take nothing for granted, since its all new. Most things I have to stare at it and try to figure how to do something. Then I ask, and realise there were 20 different ways to accomplish the same thing much easier.
SPiN Racing

Offline Gerhard Olivier

  • Sr. Member
  • ****
  • Posts: 314
Re: Gerhards hiding place????
« Reply #11 on: January 14, 2009, 02:32:07 PM »
This is my lathe in the study (yes I know I have a fab wife)


The new cross slide mount


And the second ball turner this modle is better for multiple balls of same size other one is better if just for one offs


The mini tool holder for cross drilling.



Hope I got this pics right will see :coffee:

gerhard
Guernsey
Channel Islands

Offline sbwhart

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3530
  • Country: gb
  • Smile, Be Happy, Have Fun and Rock Until you Drop
Re: Gerhards hiding place????
« Reply #12 on: January 14, 2009, 03:04:55 PM »
Hi Gerhard

Pics came through good  :thumbup: bit on the big side but OK:- Nice lathe have you had it from new ?.

Have

fun

Stew

A little bit of clearance never got in the road
 :wave:

Location:- Crewe Cheshire

Offline Gerhard Olivier

  • Sr. Member
  • ****
  • Posts: 314
Re: Gerhards hiding place????
« Reply #13 on: January 15, 2009, 03:11:55 AM »
Thans Stew

Yes bought this one new got a second hand mini lathe (chester) before and it cost me far more to get it working again than a new would have cost - and I was never happy with the results I got. That one is waiting to become a future project. (CNC/DCdrive etc.)

Thanks for the info on the wiper motor will be checking out sources for these things in the UK

Gerhard
Guernsey
Channel Islands

Offline sbwhart

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3530
  • Country: gb
  • Smile, Be Happy, Have Fun and Rock Until you Drop
Re: Gerhards hiding place????
« Reply #14 on: January 15, 2009, 03:16:08 AM »
Pleased the info on the wiper motor got through, Mick who's just registered with the forum is the source of the convertion, so I'm shure he would help out if you've any questions.

Cheers
 :wave:
Stew
A little bit of clearance never got in the road
 :wave:

Location:- Crewe Cheshire

Offline Divided he ad

  • WARNING: LIKES SHINEY THINGS
  • The Collective
  • Hero Member
  • *****
  • Posts: 1950
  • Country: gb
  • Between Chester, Wrexham, ruthin & Holywell :-)
Re: Gerhards hiding place????
« Reply #15 on: January 15, 2009, 05:51:27 PM »
Hey Gerhard.... Looks like you're another 9X20 user?  Neat set up you have there  :thumbup:



I've got to ask... The ball turner, is the second hole for the handle there by design or did you read the plan like I did the first time I made the turret?  Wondered what had happened when I test rotated it!!!!   :lol:

Looks like it will do the job nicely, is the screw holding the cutter post in on a flat? Can it be turned round 180' for concave cuts?


I like the little pencil grinder mounting, I have a similar grinder, Haven't got round to mounting it yet.... Do you use it a lot? What do you used it on?


Just poking my nose in   :D




Ralph.





Just a side note, to see if your pictures are working well, use the preview button before posting.


Stew, are they appearing too big because your viewing them on your Ipod? mine cuts the side off a lot of pic's  ::)
I know what I know and need to know more!!!

Offline Gerhard Olivier

  • Sr. Member
  • ****
  • Posts: 314
Re: Gerhards hiding place????
« Reply #16 on: January 15, 2009, 06:06:48 PM »
Hi Ralph

Made the upright part of the ball turner of silver steel (drill rod i think in US) and it can be rotated for concave.  I made a second mount for a bent hande if I dont want to remove topslide when ball cutting but it limits a lot of things (dont think ill use it much).

Have only used the mini grinder mount for spot drilling marking - to dril in the drill press (marking out a PCD). I have an idea to make the same thing again but to make it so the hight and angle can be ajusted????? will think some first. :scratch:

Gerhard
Guernsey
Channel Islands

Offline sbwhart

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3530
  • Country: gb
  • Smile, Be Happy, Have Fun and Rock Until you Drop
Re: Gerhards hiding place????
« Reply #17 on: January 16, 2009, 01:49:14 AM »
Hi Ralph

Viewed pics on PC and mac  they're big I use size large on photo bucket these seem to fit ok. Just getting use to Apple mac, one thing I've found out that its got a spell checker that runs when I'm sending madmodder messages, don't know how to get into the dictionary yet.  :borg:

Cheers


Stew
A little bit of clearance never got in the road
 :wave:

Location:- Crewe Cheshire

Offline Divided he ad

  • WARNING: LIKES SHINEY THINGS
  • The Collective
  • Hero Member
  • *****
  • Posts: 1950
  • Country: gb
  • Between Chester, Wrexham, ruthin & Holywell :-)
Re: Gerhards hiding place????
« Reply #18 on: January 16, 2009, 10:21:40 AM »

Gerhard,
I Am thinking I know what your saying about the curved handle, I was toying with the idea for the handle for the mini turner before the new owner changed his mind about it's fitting and use requirements (I've got all sorts of odd C-o-C's around here somewhere!)

Have you thought about a round cutter for the ball turner? It could be made very easily to fit into your holder design.

With the pencil grinder I think the adjustable holder would be the way to go... It would have to be quite ridgid if it was to be fully useable.... But I like the idea, could be good for small bores etc? It is quite easy to regulate the speed on mine, I assume they all have such adjustment?

One of those on an adjustable mount, a good selection of stones and cutters  (and a stone dresser) and you could probably get some good results in small scale items?... I think it is on my to try list.... Got to be worth a go?    :dremel:




Stew... You may have noticed I've been a bit of a dope and confused you with JohnS and his Ipod!!!  :bang:   Don't ask what happened there, I think I'm going to have to stop posting after 2am... This might let my brain recover!!  :scratch:


Anyhow, I am wondering if the widescreen monitor I have is helping me see the pic's with no problem?   Mac and a PC.... You got one in the 'shop and one in the house?
Spell checker is no bad thing, I keep a dictionary next to my Comp' for the words that just don't look right!  :)



Ralph.


I know what I know and need to know more!!!

Offline sbwhart

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3530
  • Country: gb
  • Smile, Be Happy, Have Fun and Rock Until you Drop
Re: Gerhards hiding place????
« Reply #19 on: January 16, 2009, 11:16:02 AM »
Hi Ralph

You can call me what you like but don't call me late for dinner  :lol:

2AM there's only one thing that can keep a young man up that late:- there soft and sweet and curvy, and trouble and expensive. :--------------------- and fun    ::)

Take

Care

Stew
A little bit of clearance never got in the road
 :wave:

Location:- Crewe Cheshire

Offline rleete

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 534
  • Country: us
Re: Gerhards hiding place????
« Reply #20 on: January 16, 2009, 11:28:59 AM »
2AM there's only one thing that can keep a young man up that late:- there soft and sweet and curvy, and trouble and expensive. :--------------------- and fun 

A good cigar?
Creating scrap, one part at a time

Offline sbwhart

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3530
  • Country: gb
  • Smile, Be Happy, Have Fun and Rock Until you Drop
Re: Gerhards hiding place????
« Reply #21 on: January 16, 2009, 11:31:38 AM »
 :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol:
A little bit of clearance never got in the road
 :wave:

Location:- Crewe Cheshire

Offline Divided he ad

  • WARNING: LIKES SHINEY THINGS
  • The Collective
  • Hero Member
  • *****
  • Posts: 1950
  • Country: gb
  • Between Chester, Wrexham, ruthin & Holywell :-)
Re: Gerhards hiding place????
« Reply #22 on: January 16, 2009, 11:36:25 AM »
Quote
2AM there's only one thing that can keep a young man up that late:- there soft and sweet and curvy, and trouble and expensive. :--------------------- and fun   


You forgot dangerous!!!  :lol:



Quote
A good cigar?
   

Fair do's Roger.... Quick!!  :lol:   (still, never have never will!  :med: )




Ralph.
I know what I know and need to know more!!!