Author Topic: 4" Scale Case Traction Engine  (Read 5501 times)

Offline sbwhart

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3530
  • Country: gb
  • Smile, Be Happy, Have Fun and Rock Until you Drop
4" Scale Case Traction Engine
« on: February 17, 2009, 11:33:07 AM »
hi Chaps

Thought this would be of interest.





Would it qualify for a nanna nomination

Cheers

 :wave:

Stew
A little bit of clearance never got in the road
 :wave:

Location:- Crewe Cheshire

bogstandard

  • Guest
Re: 4" Scale Case Traction Engine
« Reply #1 on: February 17, 2009, 12:23:38 PM »
Got it wrong again Stew.

 :wack:

Rather than copying the embed link, copy the URL instead. The site software should still show it OK.

Bogs

Offline John Hill

  • The Artful Bodger
  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 2016
  • Country: nz
Re: 4" Scale Case Traction Engine
« Reply #2 on: March 05, 2009, 07:48:40 PM »
That is no doubt a nice piece of work and a credit to the guy who made it.

Such a pity though that he chose to model an American   traction engine which just does have the good looks and proportions of a product from Leeds or some such.
From the den of The Artful Bodger

Offline Stilldrillin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4972
  • Country: gb
  • Staveley, Derbyshire. England.
Re: 4" Scale Case Traction Engine
« Reply #3 on: March 08, 2009, 04:47:15 AM »
Stew,

I`m still getting "Embedding disabled by request"!   :bang:

Hmmm......... Is it me?  :scratch:

Again.......  ::)

David.
David.

Still drilling holes... Sometimes, in the right place!

Still modifying bits of metal... Occasionally, making an improvement!

Offline HS93

  • In Memoriam
  • Hero Member
  • *****
  • Posts: 788
  • Country: gb
Re: 4" Scale Case Traction Engine
« Reply #4 on: March 08, 2009, 05:33:11 AM »
does this work










Peter
« Last Edit: March 08, 2009, 05:35:34 AM by HS93 »
I am usless at metalwork, Oh and cannot spell either . failure

Offline Brass_Machine

  • Administrator
  • Hero Member
  • *****
  • Posts: 5504
  • Country: us
Re: 4" Scale Case Traction Engine
« Reply #5 on: March 08, 2009, 10:33:24 AM »
That one works great Peter. If you get the embedding disabled by request error... just click on the video itself. It should then open a direct link to youtube in another window.

Eric
Science is fun.

We're all mad here. I'm mad. You're mad.

Offline Stilldrillin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4972
  • Country: gb
  • Staveley, Derbyshire. England.
Re: 4" Scale Case Traction Engine
« Reply #6 on: March 09, 2009, 04:21:50 AM »
Peter,

That one works nicely...... As do the thumbnails.  :thumbup:

But, not the featured vid......  :scratch:

David.
David.

Still drilling holes... Sometimes, in the right place!

Still modifying bits of metal... Occasionally, making an improvement!