Author Topic: Mods to my machnes  (Read 2639 times)

Offline ajawamnet

  • Newbie
  • *
  • Posts: 2
  • Country: us
    • AJAWAM Swarf Page
Mods to my machnes
« on: December 01, 2012, 09:02:54 AM »
typical townhouse garage - not a lot of room..

A lot of rants and some mods I did to my shop gear on my swarf page:

http://home.comcast.net/~ajawam3/swarf/swarf.htm

Offline dsquire

  • In Memoriam
  • Hero Member
  • *****
  • Posts: 2280
  • Country: ca
  • Kitchener, Ontario, Canada
Re: Mods to my machnes
« Reply #1 on: December 01, 2012, 11:24:12 AM »
typical townhouse garage - not a lot of room..

A lot of rants and some mods I did to my shop gear on my swarf page:

http://home.comcast.net/~ajawam3/swarf/swarf.htm

Wayne

You not only have a pretty face, but your smart as well. (I always wanted to say that to someone). I have followed your link above and been reading up on the modifications that you have made to various equipment. There is a lot of good tips there if anyone needs any ideas.

After looking at some of the pictures and reading most of it I came accross "Back to Portfolio" right at the top of the home page. After clicking that and reading up on your work history and track record that's when I was sure that you were more than just a pretty face.

I would like to take this opportunity to welcome you to MadModder. We have members with a very broad range of interests and I am sure that you will fit right in. If you have any questions just ask as there is usually someone around to answer or at least give an opinion. We look forward to your future participation.

To my fellow members, check out Waynes site. There is so much interesting information there that you can easily spend a half a day or more there just being entertained and educated.

Cheers :beer:

Don
Good, better, best.
Never let it rest,
'til your good is better,
and your better best