Author Topic: .22 cal. Air rifle  (Read 2932 times)

Offline Lampy

  • Jr. Member
  • **
  • Posts: 11
  • Country: us
.22 cal. Air rifle
« on: January 25, 2013, 10:29:25 PM »
This is my "Work in progress" It's .22 cal based loosely on the Crosman pumpers. It shoots a 14 gr pellet at 600 fps and will stack pellets at 10 yds. It's on the back burner for now but eventually I will get back to it.

Offline Jonny

  • Hero Member
  • *****
  • Posts: 781
Re: .22 cal. Air rifle
« Reply #1 on: January 26, 2013, 12:28:24 PM »
'Work in progress'
Last one ever done number 21 been on hold since March 2003, dont be like me get it done.


Offline Lampy

  • Jr. Member
  • **
  • Posts: 11
  • Country: us
Re: .22 cal. Air rifle
« Reply #2 on: January 27, 2013, 08:55:35 AM »
If I could only find it..... it's in here some where, among the other projects and shooters....

Offline andyf

  • In Memoriam
  • Hero Member
  • *****
  • Posts: 1796
  • Country: gb
    • The Warco WM180 Lathe - Modifications
Re: .22 cal. Air rifle
« Reply #3 on: January 27, 2013, 09:28:39 AM »
I think I know where it is, Lampy. Is there a finder's fee?   :)

Andy
Sale, Cheshire
I've cut the end off it twice, but it's still too short

Offline Lampy

  • Jr. Member
  • **
  • Posts: 11
  • Country: us
Re: .22 cal. Air rifle
« Reply #4 on: January 27, 2013, 09:46:08 AM »
I spotted it when the flash went off.
Unfortunately I am easily distracted and once  get a project "working" I tend to loose interest when it comes to the cosmetics or I move on to a different project....

Offline Jonny

  • Hero Member
  • *****
  • Posts: 781
Re: .22 cal. Air rifle
« Reply #5 on: January 27, 2013, 02:53:51 PM »
Same here made and designed down to last screw 9 unlike any other ever produced, leap years ahead of its time still not mastered by any one else in over two decades.
Made 12 semi production based 98 and 99, not worth the effort when trade were marking up 400% for doing nowt. Buy walnut stocks, barrels materials, assemble setup anodise etc for the price of a basic Benjamin, regulated too.

1st, 2, 4, 6, 7 and 21 were sidelevers, used to use number 2 since 1993 three times per week until Sept 2005, its still unfinished same as no 1.

Tend to do aftermarket accessories and top flight stuff, my own Anchutz would be around 6.4k