The Shop > Wood & Stuff

Commi Wood Lathe

(1/2) > >>

Powder Keg:
Last summer I did a little work for a free lathe. It's a made in China Cummins tool sale gem:o)

First thing that had to go was the metric spindle. It didn't match anything. I pulled it out and made one with a 1" - 8 thread.

Commi Wood Lathe

This let me mount my fancy made in china Grizzly 4 jaw wood lathe chuck on it. It is much nicer to use now! Note the flimsy looking Banjo tool holder.

Commi Wood Lathe

That is the next to be upgraded. Both the banjo and the tail stock tighten up from underneath. If you get them too close to one another the handles hit each other making it difficult to operate:o( I started by making a eccentric shaft turned between centers. I then made the end pretty.

Commi Wood Lathe

A rectangular frame was weld up and I surface ground the bottom. The tool holder portion bolts on so it can be moved front to back.

Commi Wood Lathe

My welds turned out nice:o)

Commi Wood Lathe

Here is the whole thing on my lathe. It moves easily and locks up tight. I'll be making some fancy brass ends for the handle. That and a splash of paint and the banjo will be done.

Commi Wood Lathe

I'm setting up to turn some wood bowls. I needed a face plate so I made one :D It measures 6" in diameter.

Commi Wood Lathe

Next on the list is a better tail stock. Stay tuned:o)

~Wes~

Powder Keg:
I also made a Longworth chuck. Mine is a 5 jaw self centering chuck made out of 1/2" Baltic birch ply wood. It is used to chuck up a bowl to face off the bottom after you have the inside and outside finished.

Commi Wood Lathe

I found the plans on the internet. You can see them Here and Here It was pretty easy to lay out and cut the arcs with a plunge router and a trammel that I made out of a piece of plywood. I'll post some pictures next time I use it.

~Wes~

dsquire:
Wes

Very nice. I especially like that 5 jaw chuck, looks like you made a real fine job of it. Those welds aren't too shabby either.

Cheers  :beer:

Don

philf:
All well and good Wes but what about your Penny Farthing? We need an  :update:

 :beer:

Phil.

Powder Keg:
Penny will get an update soon:o) I about have the house projects tamed. Got to keep the Misses happy :D

A couple weeks ago I made a small goblet on my wood lathe. I've been doing little projects trying to learn how all these hand tools work.

Commi Wood Lathe

I'm getting better:O)

~Wes~

Navigation

[0] Message Index

[#] Next page