Author Topic: Bling info  (Read 2647 times)

Offline Chuck in E. TN

  • Hero Member
  • *****
  • Posts: 547
  • Country: us
  • USAF Retired
Bling info
« on: February 01, 2013, 08:53:52 AM »
 I'm working on setting up a blinging area. I have a couple spare electric motors and arbors. While researching tapered buff arbors, I came across this free booklet on polishing and buffing. Lots of good info here:
 http://www.caswellplating.com/buffman.htm
 Enjoy!
 Chuck
Chuck in E. TN
Famous TN last words: "Hey ya'll, watch this..."
MicroMark 7x14, HF X2 mill, Green 4x6 saw. Harbor Freight 170A mig

Offline millwright

  • Full Member
  • ***
  • Posts: 229
  • Country: gb
  • Leeds West Yorshire
Re: Bling info
« Reply #1 on: February 01, 2013, 04:07:49 PM »
Thanks Chuck, some good information there. ive got my copy now.
John

Offline micktoon

  • Hero Member
  • *****
  • Posts: 796
  • Country: gb
Re: Bling info
« Reply #2 on: February 01, 2013, 05:32:32 PM »
Thanks Chuck, a good to the point clear booklet , worth looking at, I have a copy now too ,  :thumbup:
  Cheers Mick.

Offline Henning

  • Full Member
  • ***
  • Posts: 132
  • Country: no
  • All the kit and no clue!
Re: Bling info
« Reply #3 on: May 28, 2013, 09:39:27 AM »
Thanks for posting!

I will be needing this one shortly...
Henning

Just because i can't, doesn't mean i shouldn't?
Tool- lover, with a collection to show for it!

Offline Meldonmech

  • Hero Member
  • *****
  • Posts: 893
Re: Bling info
« Reply #4 on: September 03, 2013, 04:35:24 AM »
Hi Chuck

                        That is Blingking good information.  Ha Ha

                                                                                    Cheers David