Author Topic: Willow Bowl  (Read 3541 times)

Offline Powder Keg

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 932
  • Country: us
  • Machinist Extraordinaire
Willow Bowl
« on: April 07, 2013, 08:34:07 PM »
Last week a friend had me help clean out her shop because shes moving. There were a few pieces of willow that were big enough to make some smallish bowls out of and she said I could have them. I noticed that the bark was stuck good to the wood so I thought I would try to turn a natural edge bowl. This is what I ended up with. It's about 6 1/2" in diameter and 2 1/2" tall. It will get an oil finish when I'm done sanding it. This stuff seems to like to tear out a bit. My tools were razor sharp and I still had trouble with it.





I'll try and get more in progress pictures next time.

~Wes~
Wesley P
A Gismo ??? If it has a flywheel or spins and is made with small parts. I'll take one! If it makes noise, moves, or requires frequent oiling and dusting it's a better deal yet. It's especially right if its shiny and bright; but if it's dirty and dull it wont mater at all...

Offline vtsteam

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 6463
  • Country: us
  • Republic of Vermont
Re: Willow Bowl
« Reply #1 on: April 07, 2013, 09:12:57 PM »
That looks great, Wes!
I love it when a Plan B comes together!
Steve
https://www.youtube.com/watch?v=4sDubB0-REg

Offline Arbalist

  • Hero Member
  • *****
  • Posts: 673
  • Country: gb
Re: Willow Bowl
« Reply #2 on: April 08, 2013, 03:19:50 AM »
Very nice Wes. I've wanted to turn a natural edge bowl for ages but never got round to it. I've only turned Willow once, it was still green and I got soaked with sap!

Offline Stilldrillin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4972
  • Country: gb
  • Staveley, Derbyshire. England.
Re: Willow Bowl
« Reply #3 on: April 08, 2013, 03:47:14 AM »
Wes.
That's another beauty!  :clap: :clap: :thumbup:

David D
David.

Still drilling holes... Sometimes, in the right place!

Still modifying bits of metal... Occasionally, making an improvement!

Offline Meldonmech

  • Hero Member
  • *****
  • Posts: 933
Re: Willow Bowl
« Reply #4 on: May 08, 2013, 09:54:49 AM »


       A great result on a difficult turn.

                                                        David