The Shop > Tools
Making Simple QC Tool Holders
vtsteam:
Davo J got me inspired to make more tool holders. Mine aren't very sophisticated compared to his fine examples, and making 7 is not quite as ambitious as his 48, but he said to put up photos as I make them, so here goes.
So far, only blocks cut out.
black85vette:
What material are you using? Looks like an Atlas 12" lathe.
Pete.:
If I made a QC toolholder, that's the style I'd make too. Drummond M style!
sparky961:
How are these indexed when you swap them out? Is there a stop for the height and angle somewhere?
Pete.:
A jack-bolt stops the height, angle is done by eye :)
Navigation
[0] Message Index
[#] Next page
Go to full version