Author Topic: Bobs Cylinder Part Three  (Read 5348 times)

Offline doubleboost

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 1619
  • Country: gb
  • Newcastle Upon Tyne
Bobs Cylinder Part Three
« on: April 14, 2013, 05:39:34 PM »
Sorry lads more video

Offline micktoon

  • Hero Member
  • *****
  • Posts: 797
  • Country: gb
Re: Bobs Cylinder Part Three
« Reply #1 on: April 14, 2013, 06:14:09 PM »
  An all time classic , 'the burning brush'  :lol: :lol: :clap: :clap: .......................... It was like the Chuckle Brothers  ......... 'you to me ' ...'me to you' , I am sure I have seen that other chap somewhere before too, the fire monitor  :D  ................ still having a chuckle here now  :clap: :clap:
   But still a good infomation video of the topic too  :bow: :bow:

  Cheers Mick

Offline krv3000

  • Hero Member
  • *****
  • Posts: 2183
  • Country: gb
Re: Bobs Cylinder Part Three
« Reply #2 on: April 14, 2013, 06:38:36 PM »
hi chears john and rob  :proj:

Offline Brass_Machine

  • Administrator
  • Hero Member
  • *****
  • Posts: 5504
  • Country: us
Re: Bobs Cylinder Part Three
« Reply #3 on: April 14, 2013, 11:27:29 PM »
Nice job guys. That casting looks nice.

Eric
Science is fun.

We're all mad here. I'm mad. You're mad.

Offline Meldonmech

  • Hero Member
  • *****
  • Posts: 933
Re: Bobs Cylinder Part Three
« Reply #4 on: April 16, 2013, 04:23:25 AM »
Hi John,
              Very interesting casting video, there is always something new to learn, havn't  done any brass casting, but now I've relined my furnace with 1600c  refractory I'm ready to go. Couple of great castings, and nice bit of exitement with the brush.

                                                                                               Cheers  David

Rob.Wilson

  • Guest
Re: Bobs Cylinder Part Three
« Reply #5 on: April 16, 2013, 10:47:33 AM »
I need a hair cut  :palm:


Rob

Offline Stilldrillin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4972
  • Country: gb
  • Staveley, Derbyshire. England.
Re: Bobs Cylinder Part Three
« Reply #6 on: April 16, 2013, 01:08:36 PM »
Nicely shown lads!  :clap: :clap:

Stillgrinnin.  :lol:
David.

Still drilling holes... Sometimes, in the right place!

Still modifying bits of metal... Occasionally, making an improvement!

Offline doubleboost

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 1619
  • Country: gb
  • Newcastle Upon Tyne
Re: Bobs Cylinder Part Three
« Reply #7 on: April 16, 2013, 05:03:22 PM »
I need a hair cut  :palm:


Rob

I need a hair transplant :bugeye: :bugeye: :bugeye: :bugeye: :bugeye:
I was ok till I met you  :doh: :doh: :doh: :doh: :doh: :doh:
John

Offline jb3cx

  • Jr. Member
  • **
  • Posts: 86
Re: Bobs Cylinder Part Three
« Reply #8 on: April 16, 2013, 05:31:18 PM »
Hi John,& Rob,fantastic video, :bow:im  sure a lot of the guys watching this will learn a lot from your videos ,as you talk it through step by step,from start to the finish,i might not be much cop at the casting malarky.but at least i know now how to set the brush on fire,and
swear better than i did before i watched this,so i have learnt something,i always thought i was thick,well thats what our lass says. :)
see  you later

peter.