Author Topic: DTI Repair Part Two  (Read 5519 times)

Offline doubleboost

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 1619
  • Country: gb
  • Newcastle Upon Tyne
DTI Repair Part Two
« on: July 02, 2013, 06:08:17 PM »


John

Offline micktoon

  • Hero Member
  • *****
  • Posts: 797
  • Country: gb
Re: DTI Repair Part Two
« Reply #1 on: July 02, 2013, 06:39:33 PM »
Another quality video from the DB studios  :clap: :clap: , the wiggler was very well shown...................top marks again John  :thumbup:

  Cheers Mick

Offline vtsteam

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 6466
  • Country: us
  • Republic of Vermont
Re: DTI Repair Part Two
« Reply #2 on: July 02, 2013, 09:59:20 PM »
Wiggler?  Almost afraid to watch this one.....   :lol:
I love it when a Plan B comes together!
Steve
https://www.youtube.com/watch?v=4sDubB0-REg

Offline dsquire

  • In Memoriam
  • Hero Member
  • *****
  • Posts: 2275
  • Country: ca
  • Kitchener, Ontario, Canada
Re: DTI Repair Part Two
« Reply #3 on: July 02, 2013, 10:09:57 PM »
Wiggler?  Almost afraid to watch this one.....   :lol:

My thoughts exactly. I'm going to plug my ears and wear safety goggles just in case.  :lol: :lol:

Cheers  :beer:

Don
Good, better, best.
Never let it rest,
'til your good is better,
and your better best

Offline Meldonmech

  • Hero Member
  • *****
  • Posts: 933
Re: DTI Repair Part Two
« Reply #4 on: July 03, 2013, 02:42:13 AM »
Hi John,
                Another smart video showing all the detail.  Do you not have a micro swich on your belt/ pulley cover?  Only interested  because my 625 won't  operate with the cover open.

                                                                                                       Cheers David

Offline krv3000

  • Hero Member
  • *****
  • Posts: 2183
  • Country: gb
Re: DTI Repair Part Two
« Reply #5 on: July 03, 2013, 05:53:33 PM »
good one john

Offline Pete49

  • Sr. Member
  • ****
  • Posts: 353
  • Country: au
Re: DTI Repair Part Two
« Reply #6 on: July 03, 2013, 11:39:52 PM »
Nice one again.....and no strange noises :jaw:
Pete
oops..........oh no.........blast now I need to redo it

Offline S. Heslop

  • Hero Member
  • *****
  • Posts: 1154
  • Country: gb
  • Newcastle Upon Tyne
Re: DTI Repair Part Two
« Reply #7 on: July 04, 2013, 08:14:58 AM »
Nice one again.....and no strange noises :jaw:
Pete

I heard a couple toots at 2:26!

Another entertaining and informative video though. Looking forward to part 3.

Offline paulmo101

  • Jr. Member
  • **
  • Posts: 41
Re: DTI Repair Part Two
« Reply #8 on: July 06, 2013, 03:28:07 PM »
Hi John

Great video again - like the tip about using the compound slide to set a depth stop.

Cheers

Paul

Offline Fredbare

  • Full Member
  • ***
  • Posts: 169
  • Country: gb
  • Fakenham, Norfolk
Re: DTI Repair Part Two
« Reply #9 on: July 06, 2013, 06:16:19 PM »
Excellent video John, thanks for showing.

John