Author Topic: Displacement lubricator  (Read 4658 times)

Offline steamup

  • Jr. Member
  • **
  • Posts: 63
  • Country: england
Displacement lubricator
« on: March 26, 2014, 05:40:37 PM »
Having made four or five of these I have become frustrated by the process of filling these with the thick steam oil required. The steam ,oil pipe always seems to get in the way. I found this design on the net and thought I would give it a go.
Only time will tell if it makes much difference but it was fun to make.

Offline krv3000

  • Hero Member
  • *****
  • Posts: 2183
  • Country: gb
Re: Displacement lubricator
« Reply #1 on: March 26, 2014, 06:23:32 PM »
 :clap: it looks like it will do the job

Offline jb3cx

  • Jr. Member
  • **
  • Posts: 86
Re: Displacement lubricator
« Reply #2 on: March 26, 2014, 08:06:07 PM »
Good job ,how you getting on with the boiler.

Offline steamup

  • Jr. Member
  • **
  • Posts: 63
  • Country: england
Re: Displacement lubricator
« Reply #3 on: March 27, 2014, 03:19:40 PM »
Hoping to start the boiler in a couple of weeks time once I do the bushes