Author Topic: New here  (Read 2706 times)

Offline kenlambert

  • Newbie
  • *
  • Posts: 2
  • Country: us
    • Lambert's RC
New here
« on: June 19, 2014, 04:10:53 PM »
Just joined the site , hoping to learn something about machining and engine work.
Kenneth Lambert
www.lambertsrc.com

Offline Sid_Vicious

  • Full Member
  • ***
  • Posts: 103
  • Country: no
Re: New here
« Reply #1 on: June 19, 2014, 04:34:10 PM »
Welcome Ken, join in when you feel for it. Ask questions and you will probably get some different answers, because we are lot of people with different meanings. What are you up to? 
Nothing is impossible, it just take more time to figure out.

Offline vtsteam

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 6466
  • Country: us
  • Republic of Vermont
Re: New here
« Reply #2 on: June 19, 2014, 09:17:31 PM »
Hi Ken, welcome!! :wave:
I love it when a Plan B comes together!
Steve
https://www.youtube.com/watch?v=4sDubB0-REg

Offline Stilldrillin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4972
  • Country: gb
  • Staveley, Derbyshire. England.
Re: New here
« Reply #3 on: June 20, 2014, 01:58:38 AM »

Hi Ken!  :wave:

Welcome to the Collective.  :borg:

You've made a great start, in the right place. Lots of people here, with lots of answers. Probably, all different! :thumbup:

Looking forward to seeing your work, and sharing your adventures.  :D

David D




David.

Still drilling holes... Sometimes, in the right place!

Still modifying bits of metal... Occasionally, making an improvement!

Offline krv3000

  • Hero Member
  • *****
  • Posts: 2183
  • Country: gb
Re: New here
« Reply #4 on: June 22, 2014, 07:12:40 AM »
 :nrocks:

Offline kenlambert

  • Newbie
  • *
  • Posts: 2
  • Country: us
    • Lambert's RC
Re: New here
« Reply #5 on: June 22, 2014, 10:15:23 PM »
Thanks for the welcome party. I don't do a lot of posting but I do read a lot of the others post. I do a lot of RC airplane engine work and modifications and a lot of flying. Here is my web site www.lambertsrc.com
Kenneth Lambert
www.lambertsrc.com