I have had the bits and pieces to build an air hose spool holder along with all the small air chucks,blow guns etc. that seems to hide when you go to use them! I had a number of Items collecting dust around the shop. This is what I came up with.
Cleaned and welded up, got to love the HF lift tables. Makes it easy for us older farts to work around the iron on some projects.
Here it is after the primer and top coat is on.
My only miscalculation was that with all the airhoses on it I didn't have enough weight on the back side. Since it will be in the location next to the pressor and not move about I may bolt it to the floor. Only one of the hose reels will be hooked to the pressor and the other one for storage of the shorter hoses it does get some of the mess under control. I have a number of rims repurposed uses from vise bases to cement fill canopy anchors.