MadModder

Home Base => Introductions => Topic started by: Chris Evans on January 08, 2017, 06:36:31 AM

Title: Hello from the Midlands
Post by: Chris Evans on January 08, 2017, 06:36:31 AM
Hello all, I was told of this site by someone and thought it looked good. I retired from toolmaking three and a half years ago and now spend my free time playing around with old motorcycles. I also get to work on a football clubs groundkeeping equipment as a friend looks after it for them. I have a Bridgeport mill and a 14"x40" lathe plus all the usual stuff.
Title: Re: Hello from the Midlands
Post by: John Stevenson on January 08, 2017, 10:40:40 AM
Good to see you on board Chris.
I'm over at Long Eaton and used to do a lot on vintage bikes but haven't in the last few years.

Might get back into it when I get a new small workshop at the new house.
Title: Re: Hello from the Midlands
Post by: Chris Evans on January 08, 2017, 02:38:57 PM
Thanks for the welcome Sir John, I see you pop up on a few sites. Prewar bikes are my thing, I am not to far from you in between Lichfield and Burton on Trent.
Title: Re: Hello from the Midlands
Post by: krv3000 on January 08, 2017, 06:33:00 PM
hi and welcome
Title: Re: Hello from the Midlands
Post by: Biggles on January 13, 2017, 12:58:57 PM
Hi and welcome Chris.  :coffee:
Title: Re: Hello from the Midlands
Post by: howsitwork? on January 15, 2017, 02:01:52 PM
Hello and welcome to the asylum