MadModder

The Craftmans Shop => Model Engineering => Topic started by: Nemt on March 29, 2014, 08:08:11 AM

Title: Plans for Palmer engine
Post by: Nemt on March 29, 2014, 08:08:11 AM
Hello every one,
An old frien of mine came back from America with a set of castings. They are meant for making a model from a Palmer Bros engine, 2 clinder 4-stroke.
There was a drawing signed H Upshure 12-15-00.
Problem is that it is for a singe cylinder engine. The castings are for a 2-cylinder.
Does any one know about or have the drawings/plans for this engine?

Nemt