MadModder
Home Base => Introductions => Topic started by: DaveS on February 16, 2017, 07:15:11 PM
-
My second attempt at an introduction, I messed up the first back in December. I reside most days in a 8 x 12 shed at the bottom of the garden along with a mill and lathe from the far east. Both of which I'm modifying bits at time to my satisfaction, those of you who have these machines will know what I mean. I'll try to remember some photos tomorrow.
Those of you in the far north have the Northern Lights but over the last few weeks I have sighted flashes of Plasma light to the east and today a Boom travelling at the speed of air from the same direction across the border.
Apologies in advance Andrew
Dave Spicer
-
Dave welcome aboard, I'm glad that the flashes and flying debris all missed you :lol:
Now you need to expand this thread with tales of what you get up to in this shed at the bottom of the garden, and why you've been banished there :clap:
-
Westerly view of my 8 x 12 refuge. These are the two machines responsible for most of the swarf and scrap along with a ML7 prior to the green meanie.
Main successes include a Cut off saw along the design by Myford Boy, A Stuart S50 from castings and about 2/3 way through a Stothert & Pitt Beam engine also from castings.
Modifications have made to the mill by adding DRO and a lubrication system.
Lots of other small stuff but I can't remember of the top of head. Better sign off now to see if the photos are regulation size
Dave
-
I think you could make them larger :D
-
hi and welcume
-
Hi and welcome fro me also.
800x600 pixels is a good size
Jon
-
Or 640 x 480 so people can easily view them on most devices without walking out of the room :lol:
-
http://madmodder.net/Smileys/default/doh-45.gif
Photo resize I hope
-
Purrfect .... :thumbup:
-
I was up north last Xmas and heard loud noises. I thought it was the Fife rescue helicopter didn’t think it could be Andrew; the decibels must have been off the scale. Glad to see no ice crystals on your machines. Welcome Dave.
:lol:
-
Oi ....... leave me alone .... :clap:
-
bit late but welcome anyway.
Andrew they were probably just your fittings from the air line leading north! :thumbup:
Ian
-
:lol: :lol: :lol: :zap: :lol: :lol: :lol: