MadModder

Gallery, Projects and General => Oooops! => Topic started by: Joules on April 15, 2017, 12:34:50 PM

Title: Can I use a chuck in a chuck
Post by: Joules on April 15, 2017, 12:34:50 PM

YES !!!

(http://i.imgur.com/kb3Q6TX.jpg?1)

Within reason.   To miss quote AvE, keep yer Dick away from my chucks...

Title: Re: Can I use a chuck in a chuck
Post by: Pete. on April 15, 2017, 01:05:46 PM

not got a pin chuck then?  :)

Title: Re: Can I use a chuck in a chuck
Post by: Joules on April 15, 2017, 01:07:02 PM

Nope, and I didn't want to get too close to that dangerous BIG chuck....

Title: Re: Can I use a chuck in a chuck
Post by: awemawson on April 15, 2017, 02:04:17 PM

I reckon that you're showing off - flash b.....d with some many SHINY chucks  :lol:

(also possibly a bit bored - time on your hands Joules ? )

Title: Re: Can I use a chuck in a chuck
Post by: Joules on April 15, 2017, 02:09:49 PM

Yeah, works gone quiet and the wife wanted these pin heads rounding off, only another few hundred more to go  :ddb:

Title: Re: Can I use a chuck in a chuck
Post by: PekkaNF on April 15, 2017, 04:21:26 PM

You really should get your slice of carrot cake.

You are not you, when you are hungry.

Title: Re: Can I use a chuck in a chuck
Post by: shipto on April 15, 2017, 04:28:22 PM

The big question is how true does it run  :poke:

Title: Re: Can I use a chuck in a chuck
Post by: raynerd on April 16, 2017, 02:32:09 AM

I wish I had so many chucks!! You defo need a pin vice :-)

Did it work or was this just for fun?

Title: Re: Can I use a chuck in a chuck
Post by: Joules on April 16, 2017, 04:55:03 AM

It's all "Tongue in Chuck" Chris.   :thumbup:

Title: Re: Can I use a chuck in a chuck
Post by: tom osselton on April 16, 2017, 12:12:31 PM

Thats what the wood chuck said!  :beer:

Title: Re: Can I use a chuck in a chuck
Post by: mechman48 on April 19, 2017, 10:40:36 AM

Sure you're not designing a mini pagoda   :scratch:

George

Title: Re: Can I use a chuck in a chuck
Post by: AdeV on April 19, 2017, 11:26:34 AM

Quote from: shipto on April 15, 2017, 04:28:22 PM

The big question is how true does it run  :poke:

I'm guessing any runout in the first 3 chucks can be addressed by the penultimate 4-jaw chuck, thus reducing TIR to something manageable.  :headbang:

Title: Re: Can I use a chuck in a chuck
Post by: Joules on April 19, 2017, 12:27:10 PM

It's really good for resonance.  Where as I used to get a poor finish at certain speeds and diameters.  Now it's a crap finish at all speeds. 
 :lol:

Title: Re: Can I use a chuck in a chuck
Post by: DMIOM on April 19, 2017, 01:09:28 PM

If the drill chuck is too small to grip in the big three-jaw, wouldn't it be better to just wrap it in gaffer tape?  :coffee:

Dave

Title: Re: Can I use a chuck in a chuck
Post by: AdeV on April 21, 2017, 12:58:50 AM

Quote from: DMIOM on April 19, 2017, 01:09:28 PM

If the drill chuck is too small to grip in the big three-jaw, wouldn't it be better to just wrap it in gaffer tape?  :coffee:

How's it supposed to reach the workpiece then? Tsk, you haven't thought this through!  :lol:

Title: Re: Can I use a chuck in a chuck
Post by: CrazyModder on April 21, 2017, 04:58:59 AM

Quote from: Joules on April 15, 2017, 12:34:50 PM

Within reason.   

Spoken like a real modder.