Author Topic: a taping head refit  (Read 3460 times)

Offline krv3000

  • Hero Member
  • *****
  • Posts: 2183
  • Country: gb
a taping head refit
« on: January 03, 2015, 09:02:03 PM »
hi well this belongs to john its bin wel basht a bawt and sum one has had a go at making the shaft ni to a jt No2 after a good cleen and figerd out wot gose wher i got it to work propely but the saft is the poroblem it dus not unscruw so i will have to have a meting with john to see witch way we is gowing to put this right enay way her are sum pics for sum reson they have a yelow tint to them  so i have bind most of them will get sum beter ones of the workings tomorow

Offline krv3000

  • Hero Member
  • *****
  • Posts: 2183
  • Country: gb
Re: a taping head refit
« Reply #1 on: January 04, 2015, 10:22:26 AM »
hi all as promist more pics in all a part from the shaft its in good order

Offline micktoon

  • Hero Member
  • *****
  • Posts: 797
  • Country: gb
Re: a taping head refit
« Reply #2 on: January 04, 2015, 11:08:53 AM »
Hi Bob , good to see you back in the workshop. Good job of stripping and inspecting Johns tapping head, if its all ok except for tge shaft I am sure John will be able to sort something out to repair it.

 Cheers Mick