Author Topic: Bike Timing Sprocket.  (Read 22199 times)

Offline Zadig

  • Jr. Member
  • **
  • Posts: 68
  • Country: gb
Bike Timing Sprocket.
« on: April 07, 2015, 09:02:15 AM »
A friend of mine asked me if I would make him a timing sprocket for his classic bike. The guy is one of the most gifted engineers I have come across but he was struggling to get a fabricated sprocket to run true enough. I tend to post over a few days so more tomorrow.










Offline Brass_Machine

  • Administrator
  • Hero Member
  • *****
  • Posts: 5504
  • Country: us
Re: Bike Timing Sprocket.
« Reply #1 on: April 07, 2015, 11:54:20 AM »
What kind of bike?

Eric
Science is fun.

We're all mad here. I'm mad. You're mad.

Offline Zadig

  • Jr. Member
  • **
  • Posts: 68
  • Country: gb
Re: Bike Timing Sprocket.
« Reply #2 on: April 07, 2015, 12:49:43 PM »
It's for an OK Supreme as far as I know.

Offline Brass_Machine

  • Administrator
  • Hero Member
  • *****
  • Posts: 5504
  • Country: us
Re: Bike Timing Sprocket.
« Reply #3 on: April 07, 2015, 01:20:45 PM »
Nice. Do you plan to treat the steel when you are finished?
Science is fun.

We're all mad here. I'm mad. You're mad.

Offline Zadig

  • Jr. Member
  • **
  • Posts: 68
  • Country: gb
Re: Bike Timing Sprocket.
« Reply #4 on: April 07, 2015, 03:29:49 PM »
No, the steel is EN19T, a chrome alloy, which is fairly tough stuff and already in a treated state. I picked up 7mtrs of it at an auction a wee while back.

Offline Zadig

  • Jr. Member
  • **
  • Posts: 68
  • Country: gb
Re: Bike Timing Sprocket.
« Reply #5 on: April 08, 2015, 02:10:05 AM »







Offline Lykle

  • Jr. Member
  • **
  • Posts: 77
  • Country: cy
Re: Bike Timing Sprocket.
« Reply #6 on: April 08, 2015, 03:35:42 AM »
7 Meters! Heavy chunk of steel. Wow.

Things are progressing nicely by the look of it. Pretty soon you will hit the tricky parts. Looking forward to that.
Lykle

Design, Build and Enjoy life.

Offline Zadig

  • Jr. Member
  • **
  • Posts: 68
  • Country: gb
Re: Bike Timing Sprocket.
« Reply #7 on: April 08, 2015, 04:02:00 AM »
Thanks Lykle,

Thankfully, the steel was already cut for a job and came in 700mm lengths. There was some lovely large diameter material there that day, that went through cheap. I had no idea what the spec of the steel I bid for was, it was just one of those pot luck gambles you take from time to time. I was hoping for a good, fairly free machining case hardening steel, but got this instead. Ironically, I have just got through the last bits of a load of 100mm EN24T which was purchased at another auction years ago. I made a set of powered rolls with most of it and will probably do the same with this stuff. As it turns out, this material is ideal for tooling and gears which crop up fairly often.

Offline Zadig

  • Jr. Member
  • **
  • Posts: 68
  • Country: gb
Re: Bike Timing Sprocket.
« Reply #8 on: April 09, 2015, 01:26:39 AM »







Offline Zadig

  • Jr. Member
  • **
  • Posts: 68
  • Country: gb
Re: Bike Timing Sprocket.
« Reply #9 on: April 10, 2015, 01:40:30 AM »














Offline Zadig

  • Jr. Member
  • **
  • Posts: 68
  • Country: gb
Re: Bike Timing Sprocket.
« Reply #10 on: April 11, 2015, 01:40:08 AM »







Offline mexican jon

  • Full Member
  • ***
  • Posts: 214
  • Country: england
Re: Bike Timing Sprocket.
« Reply #11 on: April 11, 2015, 04:02:57 AM »
Nice work  :thumbup: I have a couple of questions  :lol: why didn't you bore to size when you had it in the 3 jaw chuck that most of the machining was done ? What was the logic in using a faceplate rather than a 4 jaw chuck ?
People say you only live once ! I say thank F@*K can't afford to do it twice.

Offline Zadig

  • Jr. Member
  • **
  • Posts: 68
  • Country: gb
Re: Bike Timing Sprocket.
« Reply #12 on: April 11, 2015, 05:54:18 AM »
Firstly, thanks for the thumbs up, glad it amused you.

I wanted a good fit on the taper. If I had done as you said and cut the taper with the op in the first instance, I would have had to have left the large boss on to hold the blank to machine the reverse side. This would then have necessitated a further op to reduce the boss to the finished size. If you are suggesting that the whole of the front face could have been machined in one setup, then there would have been a danger of crushing the taper when machining the obverse side, plus this extra step would negate any advantage you were trying to gain.

Cutting the taper using the topslide was also made easier because the reverse side has the recess. It's quite a deep hole for a small boring tool, so any advantage in chip clearance because of the through hole, on this tough alloy steel was welcome. It gave me the advantage of not having to drill deeper than was necessary to give clearance for the taper thread, thereby potentially ruining the end of the remaining stock.

I see no logic in holding it in a four jaw to machine the rear. Clocking the back side of it would have been awkward to say the least. Then there are the holding marks it would leave on the diameter. The tooth thickness is only .188" thick, which would have needed some holding force in the four jaw.


You may think differently, but like all things in this game, you do what suits you.




Offline mexican jon

  • Full Member
  • ***
  • Posts: 214
  • Country: england
Re: Bike Timing Sprocket.
« Reply #13 on: April 11, 2015, 08:50:23 AM »
Firstly I was laughing at myself  :scratch: as I knew there was a perfectly logical reason you had done what you had done  :clap: I guess I should have studied the pictures more and realised that the spocket was going on to a taper  :doh:

It was just as I was thinking of the questions I was giggling thinking when I read the answers  " Jon you should have realised that"  :) :)
People say you only live once ! I say thank F@*K can't afford to do it twice.

Offline Zadig

  • Jr. Member
  • **
  • Posts: 68
  • Country: gb
Re: Bike Timing Sprocket.
« Reply #14 on: April 11, 2015, 09:28:07 AM »
It was a fair question and I had to think back as to why I did it that way. If you have the patience there is nearly always a few ways to get the job done. A four jaw could have been used, but setting it up would have taken a fair amount of time in comparison to the way it was done.

Thanks again for the comment, I'm still new here and finding my way around.


Offline Manxmodder

  • Hero Member
  • *****
  • Posts: 739
  • Country: gb
Re: Bike Timing Sprocket.
« Reply #15 on: April 11, 2015, 11:41:32 AM »
Another advantage of clamping flat to a faceplate is that it tends to reduce any resonant frequency being set up in the component itself. This method of mounting provides a damping effect and helps to further reduce the likelihood of chatter marks in a critical bore where conditions are fairly borderline to begin with whereas the relatively small contact area of a 4 jaw doesn't provide near as much damping effect.

Nice job so far Zadig  :clap: :clap:.....OZ.
Helixes aren't always downward spirals,sometimes they're screwed up

Offline Ginger Nut

  • Full Member
  • ***
  • Posts: 232
Re: Bike Timing Sprocket.
« Reply #16 on: April 11, 2015, 11:41:58 PM »
 :thumbup: :thumbup:

Offline Zadig

  • Jr. Member
  • **
  • Posts: 68
  • Country: gb
Re: Bike Timing Sprocket.
« Reply #17 on: April 12, 2015, 02:21:45 AM »
Thanks OZ. Nice point about the damping.

Cheers Ginger.

The suds was a bit gruesome, I used some neat cutting oil and a brush in the end.













Online awemawson

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8966
  • Country: gb
  • East Sussex, UK
Re: Bike Timing Sprocket.
« Reply #18 on: April 12, 2015, 02:49:17 AM »
Very nice.  :bow:

Are you going to black it?
Andrew Mawson
East Sussex

Offline Zadig

  • Jr. Member
  • **
  • Posts: 68
  • Country: gb
Re: Bike Timing Sprocket.
« Reply #19 on: April 12, 2015, 03:09:31 AM »
No I didn't Andrew, I'll leave that upto the guy himself. It's his field, restoration, and he will have far more idea than I have about these things. It would have looked good though.

BTW, I like your idea of Sterling board for flooring. My concrete floor was put down in the pouring rain and powders up something terrible. I've been giving it some thought over the years but never gave OSB a thought. Just wanted to show my appreciation and say thanks.


Online awemawson

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8966
  • Country: gb
  • East Sussex, UK
Re: Bike Timing Sprocket.
« Reply #20 on: April 12, 2015, 03:26:23 AM »
OSB has worked well for me over the years - I have a patch in my present workshop between two desks where my swivle chair runs and it's in dire need of re-painting, but apart from that it's stood up to wear very well, and is not too bad to stand on. Another advantage is that dropped tools don't chip!
Andrew Mawson
East Sussex

Offline Zadig

  • Jr. Member
  • **
  • Posts: 68
  • Country: gb
Re: Bike Timing Sprocket.
« Reply #21 on: April 12, 2015, 03:55:22 AM »
I do tend to drop a lot of tools or more often a particularly nice piece of work. I often think to myself that it's a good job my balls are in a bag.

Offline mexican jon

  • Full Member
  • ***
  • Posts: 214
  • Country: england
Re: Bike Timing Sprocket.
« Reply #22 on: April 12, 2015, 06:57:48 AM »
Cracking finished sprocket  :bow: :bow: :bow: :bow:

Here goes for another question  :doh: How did you index the spacing, or was it done on a cnc mill?
People say you only live once ! I say thank F@*K can't afford to do it twice.

Offline Zadig

  • Jr. Member
  • **
  • Posts: 68
  • Country: gb
Re: Bike Timing Sprocket.
« Reply #23 on: April 12, 2015, 07:16:36 AM »
Thanks Jon.

I have to admit I cheated and used a CNC mill.

Offline vintageandclassicrepairs

  • Full Member
  • ***
  • Posts: 218
Re: Bike Timing Sprocket.
« Reply #24 on: April 12, 2015, 06:20:41 PM »
Hi Zadig,
Nice work on the sprocket :clap:
I am puzzled about the OK Supreme that its intended for ?
I know they made the ohc lighthouse model but cannot place a model with chain driven cam?
Could you ask the owner for some further information or a photo?
BTY I have a little 285cc side valve model from 1932 + a 36/7 JAP 250ov engine made and badged for OK
It even has "OK" cast into the head and cylinder !!

Regards
John

Offline Zadig

  • Jr. Member
  • **
  • Posts: 68
  • Country: gb
Re: Bike Timing Sprocket.
« Reply #25 on: April 12, 2015, 07:48:03 PM »
Thanks John,

This might help you with your questions:

http://madmodder.net/index.php/topic,10435.0.html

I'm not a bike man myself although I do appreciate them. This guy has a rare talent in my opinion.

Offline Anzaniste

  • Full Member
  • ***
  • Posts: 207
  • Country: gb
Re: Bike Timing Sprocket.
« Reply #26 on: April 13, 2015, 11:32:40 PM »
Thanks Jon.

I have to admit I cheated and used a CNC mill.

Is that how you machined the angled entry to each of the sprocket teeth?
Scrooby, 1 mile south of Gods own County.

Offline Zadig

  • Jr. Member
  • **
  • Posts: 68
  • Country: gb
Re: Bike Timing Sprocket.
« Reply #27 on: April 14, 2015, 01:28:47 AM »
Anzaniste: yes, the code was generated in the software - too easy!

I have a notion to build a full size Anzani three cylinder engine of the type used by Bleriot's cross channel plane - I don't suppose you are an Anzani Guru are you?

Offline vtsteam

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 6466
  • Country: us
  • Republic of Vermont
Re: Bike Timing Sprocket.
« Reply #28 on: April 14, 2015, 09:37:09 AM »
Photographed last summer at the Owl's Head museum:



I love it when a Plan B comes together!
Steve
https://www.youtube.com/watch?v=4sDubB0-REg

Offline vtsteam

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 6466
  • Country: us
  • Republic of Vermont
Re: Bike Timing Sprocket.
« Reply #29 on: April 14, 2015, 09:41:19 AM »
I love it when a Plan B comes together!
Steve
https://www.youtube.com/watch?v=4sDubB0-REg

RobWilson

  • Guest
Re: Bike Timing Sprocket.
« Reply #30 on: April 14, 2015, 12:06:52 PM »
Steve that there new fangled flying  machine has the the wrong engine in it  :poke:



I have a notion to build a full size Anzani three cylinder engine of the type used by Bleriot's cross channel plane - I don't suppose you are an Anzani Guru are you?


There is nee friggin way you would get me up it this .  ( Paris ,Musee des Arts et Metiers 2013) , there  are no  head or arm rests   :loco:



The engine is very interesting though  :med: and would make a cracking project , think I have drawings for it some were  :scratch:





Rob

PS , canny job machining the new sprocket  :thumbup: , reminds me I must get my cheating CNC mill finished  :lol: :lol:

Offline Pete W.

  • Hero Member
  • *****
  • Posts: 852
  • Country: gb
Re: Bike Timing Sprocket.
« Reply #31 on: April 14, 2015, 02:29:37 PM »
Hi there, all,

Forgive me if this is   :offtopic:  Here I go, swinging the lamp again:

A few years ago, I was talking with an older relative, telling her that my father had worked for a time for Weymanns (coachworks) at Addlestone in Surrey.  Much to my surprise, she told me that the building had previously (i.e. before Weymanns) been used to assemble Bleriot monoplanes from parts brought over from France.  The works had a special license to wheel the completed aircraft, presumably with their wings unshipped, a few hundred yards down the main street of Addlestone to the railway station for onward delivery to customers.

See here  http://www.timebus.co.uk/rlh/weymann.htm

While at Weymanns my father did some work on lorries but he told me that their principal line was building 'Black Marias', used to transport prisoners to and from prison and the courts.  They weren't actually black but a very deep navy blue, applied in many coats each rubbed down with cuttlefish bone in preparation for the next coat.  They had six cells, three on each side of a central corridor.  In case a prisoner refused to come out, each cell had a ceiling rose that could be connected to a convenient fire hydrant!

The web-site I've linked-to above is primarily about buses - I don't remember my father ever mentioning buses.  However, I do know that Weymanns used to make high quality motor car bodies as did Park Ward and Tickfords.

Coming back to aviation - a few hundred yards from the Weymanns site was the factory of 'The Airscrew Company and Jicwood Limited'.  The 'Airscrew Company' bit made beautiful laminated wooden aircraft propellors while the 'Jicwood' bit was an early chipboard factory.  There must have been some sort of a link to Weymanns because, on a school tour, in 1952-ish, we were shown huge panels of moulded expanded rubber, destined to become the insulating layer in bus roofs (or rooves!!).   
Best regards,

Pete W.

If you can keep your head when all about you are losing theirs, you haven't seen the latest design change-note!

Offline Zadig

  • Jr. Member
  • **
  • Posts: 68
  • Country: gb
Re: Bike Timing Sprocket.
« Reply #32 on: April 15, 2015, 02:41:16 AM »
Thanks for the pictures guys. It never ceases to amaze me how one idle sentence can open up avenues and provide a new outlook - cheers.

I paid a visit to RAF Cosworth a number of years back to visit the museum there. I expected a half arsed run affair but it is far from that and well worth a visit. Towards the end of the tour (so to speak) I came across a little Tri-radial engine with Anzani cast into the front of it, I was taken with it and it has never been far from my mind. The engine was a cross between both the engines in the above pictures. It was an inverted Y format with a flat fronted crankcase. I think Les Chenery may have produced castings for a scaled down version. I've deliberately not done too much research on the thing, I need to get the Burrell out of the way first. Rob, what are the drawings you have and can you remember where you got them? It doesn't matter if they are for the W format engine.

That was interesting Pete, thanks for putting it up. You never know where this kind of knowledge will lead to.

Offline vtsteam

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 6466
  • Country: us
  • Republic of Vermont
Re: Bike Timing Sprocket.
« Reply #33 on: April 15, 2015, 09:47:28 AM »
The exhaust ports on the upright version are so reminiscent of the simplest steam uniflow exhausts! My pipe n' bolt steam engine has simple drilled ports, too.
Rob, probably the plywood bulkhead in the photos I put up (and the distributor out back) aren't too accurate, either, now you mention it!  :)
That one at Owl's head is a replica of a 1910 version, apparently. Though the engne is supposed to be a genuine Anzani of that year. Not the channel crosser, though..
I love it when a Plan B comes together!
Steve
https://www.youtube.com/watch?v=4sDubB0-REg

RobWilson

  • Guest
Re: Bike Timing Sprocket.
« Reply #34 on: April 15, 2015, 12:24:50 PM »
Its still a fine looking aircraft Steve  :thumbup: 

Thanks for the pictures guys. It never ceases to amaze me how one idle sentence can open up avenues and provide a new outlook - cheers.

 Rob, what are the drawings you have and can you remember where you got them? It doesn't matter if they are for the W format engine.



 :lol: :lol: aye the twists and turns of a Madmodder thread  :) This is a wee bit safer project  ,,,,wonder if I could get an MOT/SVA   :scratch:




PM sent regards engine drawings .


Rob

Offline vintageandclassicrepairs

  • Full Member
  • ***
  • Posts: 218
Re: Bike Timing Sprocket.
« Reply #35 on: April 15, 2015, 04:18:08 PM »
Hi Zadig,
Aha !! Lost in translation  :doh: :doh:
We would refer to these as "magneto" sprockets as opposed to timing sprockets
tomatoe- tomato ???

Yes I have already read all the way through  the restoration thread on the "lighthouse" OK Supreme which of course has timing gears  :scratch:

Regards
John

Offline Manxmodder

  • Hero Member
  • *****
  • Posts: 739
  • Country: gb
Re: Bike Timing Sprocket.
« Reply #36 on: April 15, 2015, 06:23:31 PM »
John, I did wonder the same about it being a magneto sprocket when I saw the photos of the taper bore......OZ.
Helixes aren't always downward spirals,sometimes they're screwed up

Offline Anzaniste

  • Full Member
  • ***
  • Posts: 207
  • Country: gb
Re: Bike Timing Sprocket.
« Reply #37 on: April 16, 2015, 01:54:16 AM »
Anzaniste: yes, the code was generated in the software - too easy!

I have a notion to build a full size Anzani three cylinder engine of the type used by Bleriot's cross channel plane - I don't suppose you are an Anzani Guru are you?

Guru, no, enthusiast yes :thumbup:

My interest stems from the fact that the engine in my Frazer Nash, illustrated in my avatar, is a 1497cc side valve Anzani. Surprisingly the engine has roller tappets.

I too have a fancy to build a full size of the "W" engine and would be interested to know more about the drawings, can you help Rob?
Scrooby, 1 mile south of Gods own County.

Offline Zadig

  • Jr. Member
  • **
  • Posts: 68
  • Country: gb
Re: Bike Timing Sprocket.
« Reply #38 on: April 16, 2015, 04:30:08 AM »
Have you seen the website:

http://www.pioneeraviator.com

He's made a nice job of a batch of W fan engines. He talks of producing the three cylinder Y too.
The Fan engine certainly has more applications at ground level. If I come across anything I'll keep you informed. Now might be the time to do a little research.


RobWilson

  • Guest
Re: Bike Timing Sprocket.
« Reply #39 on: April 16, 2015, 12:04:03 PM »


I too have a fancy to build a full size of the "W" engine and would be interested to know more about the drawings, can you help Rob?


I just have drawings for "Y"  config ,,,,,,,,,,,PM me if your still interested  :thumbup:     ,,,,,,,,,,,mined I am sure I did have some "W"  info some were  :scratch:


Rob 

Offline kuutiopää

  • Jr. Member
  • **
  • Posts: 10
  • Country: fi
  • Everything goes if hammer is big enough!
Re: Bike Timing Sprocket.
« Reply #40 on: April 18, 2015, 12:33:38 PM »
Thanks Zadig, chainwheel is brilliant.  :ddb: