Author Topic: Harrogate 2015  (Read 20757 times)

Offline John Rudd

  • Hero Member
  • *****
  • Posts: 2253
  • Country: gb
Harrogate 2015
« on: April 26, 2015, 12:32:04 PM »
So it's around 2 weeks away, so hands up who is going, what day?
Are we gonna meet up?
eccentric millionaire financed by 'er indoors
Location:  Backworth Newcastle

Skype: chippiejnr

Offline doubleboost

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 1618
  • Country: gb
  • Newcastle Upon Tyne
Re: Harrogate 2015
« Reply #1 on: April 26, 2015, 01:09:55 PM »
Saturday for me
John

Offline Bluechip

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 1506
  • Country: england
  • Derbyshire UK
Re: Harrogate 2015
« Reply #2 on: April 26, 2015, 01:18:33 PM »
Just spokened to Mr. Stilldrillin and it's a maybe, verging on a distinct possibility, that said venerable geezer and myself will be there on Sat.

Although if we are captured by them aliens in a flying saucer for breeding purposes again, we won't .... ..  :thumbup:

Dave 
I have a few modest talents. Knowing what I'm doing isn't one of them.

RobWilson

  • Guest
Re: Harrogate 2015
« Reply #3 on: April 26, 2015, 02:04:50 PM »
MMMMMMM may have a run down  Saturday  :coffee:



Rob

Offline sbwhart

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3522
  • Country: gb
  • Smile, Be Happy, Have Fun and Rock Until you Drop
Re: Harrogate 2015
« Reply #4 on: April 26, 2015, 02:50:57 PM »
Just entered into negotiations with the Boss   :bow:

I try and make it Saturday.

Stew
A little bit of clearance never got in the road
 :wave:

Location:- Crewe Cheshire

Offline Stilldrillin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4917
  • Country: gb
  • Staveley, Derbyshire. England.
Re: Harrogate 2015
« Reply #5 on: April 26, 2015, 03:13:22 PM »
Mrs Drillin, says yes.  :thumbup:

So...... It's wot Dave Bluechip says. I think!  :scratch:

David D

David.

Still drilling holes... Sometimes, in the right place!

Still modifying bits of metal... Occasionally, making an improvement!

Offline John Stevenson

  • In Memoriam
  • Hero Member
  • *****
  • Posts: 1643
  • Nottingham, England.
Re: Harrogate 2015
« Reply #6 on: April 26, 2015, 04:50:12 PM »
As I posted on another thread, I'm there all of the three days on the single ARC stand running demo's on the new end mill sharpener. Not sure where the stand will be but guess it's roughly where ARC used to stand by the doors in the long hall.
John Stevenson

Offline John Rudd

  • Hero Member
  • *****
  • Posts: 2253
  • Country: gb
Re: Harrogate 2015
« Reply #7 on: April 26, 2015, 04:55:48 PM »
So, we're quite a gathering.... :beer:

Where shall we meet? My vote is at the ARC stand? Around 12....

We can continue taking the mickey out of each other discussing our latest workshop efforts while we watch John grind some stuff...
eccentric millionaire financed by 'er indoors
Location:  Backworth Newcastle

Skype: chippiejnr

Offline micktoon

  • Hero Member
  • *****
  • Posts: 797
  • Country: gb
Re: Harrogate 2015
« Reply #8 on: April 26, 2015, 06:16:13 PM »
I will be going down Saturday too, I think Bob KRV3000 is coming down saturday also. Should be a good day out, will keep an eye on the gathering plans
  Cheers Mick.

Offline Jonfb64

  • Jr. Member
  • **
  • Posts: 76
  • Country: england
Re: Harrogate 2015
« Reply #9 on: April 26, 2015, 06:31:31 PM »
Anyone going Friday?

Jon

Offline kayzed1

  • Full Member
  • ***
  • Posts: 211
Re: Harrogate 2015
« Reply #10 on: April 26, 2015, 08:09:26 PM »
As I posted on another thread, I'm there all of the three days on the single ARC stand running demo's on the new end mill sharpener. Not sure where the stand will be but guess it's roughly where ARC used to stand by the doors in the long hall.


I could maybe bring along my box of about 60 end mills for you to test that cutter on if you like :thumbup:
Lyn.

Offline John Stevenson

  • In Memoriam
  • Hero Member
  • *****
  • Posts: 1643
  • Nottingham, England.
Re: Harrogate 2015
« Reply #11 on: April 27, 2015, 03:53:15 AM »
Everyone is welcome to bring some but going to have to put a 5-6 ? limit on them so everyone gets a chance.
Will be able to do 3mm to 12mm in 2,3 or 4 flute in HSS or Carbide.

If you have any with chipped ends then just flat them off on a grinder before you come to save having to repeated grind them back. It doesn't need any end cutting edges left, it can start from a solid if needed. 4 flutes can be the type with a pip in or if they are ground back to get rid of the pip then it will grind them centre cutting.

You lads won't be the only ones as there is an article in MEW on the grinder where it's stated that we will be doing cutters at the show.

Article here for those that don't take MEW.

http://www.stevenson-engineers.co.uk/files/MEW%20article.pdf
John Stevenson

Offline Manxmodder

  • Hero Member
  • *****
  • Posts: 739
  • Country: gb
Re: Harrogate 2015
« Reply #12 on: April 27, 2015, 06:47:00 AM »
Mrs Drillin, says yes.  :thumbup:

So...... It's wot Dave Bluechip says. I think!  :scratch:

David D

Which bit did she approve of.....you going to the show or being abducted by aliens?  :).......OZ.
Helixes aren't always downward spirals,sometimes they're screwed up

Offline Deko

  • Sr. Member
  • ****
  • Posts: 253
  • Country: england
Re: Harrogate 2015
« Reply #13 on: April 28, 2015, 07:22:18 AM »
Six of us going from Crewe "Men in Sheds" on the Friday. The meeting place for the last few years has been by the big window at the back of the main entrance hall (plenty of room there) at 12 noon, but if anyone else going on Friday wants to use an alternative, that will be fine by us.
I will have to sort through my end mills for John to play with. :palm:

Cheers Dek.  :med:

Offline Stilldrillin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4917
  • Country: gb
  • Staveley, Derbyshire. England.
Re: Harrogate 2015
« Reply #14 on: April 28, 2015, 05:17:57 PM »
Mrs Drillin, says yes.  :thumbup:

So...... It's wot Dave Bluechip says. I think!  :scratch:

David D

Which bit did she approve of.....you going to the show or being abducted by aliens?  :).......OZ.

She doesn't know about the aliens. Or the breeding purposes........

David D
David.

Still drilling holes... Sometimes, in the right place!

Still modifying bits of metal... Occasionally, making an improvement!

Offline John Rudd

  • Hero Member
  • *****
  • Posts: 2253
  • Country: gb
Re: Harrogate 2015
« Reply #15 on: April 28, 2015, 05:23:11 PM »
I printed off my tickets this morning...( going Saturday......)
So we gonna met up?
Say 12 ish and see John Stevo hard at it grinding away?..... :lol:
eccentric millionaire financed by 'er indoors
Location:  Backworth Newcastle

Skype: chippiejnr

Offline S. Heslop

  • Hero Member
  • *****
  • Posts: 1147
  • Country: gb
  • Newcastle Upon Tyne
Re: Harrogate 2015
« Reply #16 on: April 28, 2015, 05:27:02 PM »
Shame I still don't own a car. Maybe next year...

Offline Stilldrillin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4917
  • Country: gb
  • Staveley, Derbyshire. England.
Re: Harrogate 2015
« Reply #17 on: April 28, 2015, 05:28:12 PM »
I printed off my tickets this morning...( going Saturday......)
So we gonna met up?
Say 12 ish and see John Stevo hard at it grinding away?..... :lol:

Same here, John!  :thumbup:

12 ish, sounds ok to me.......

David D
David.

Still drilling holes... Sometimes, in the right place!

Still modifying bits of metal... Occasionally, making an improvement!

Offline John Rudd

  • Hero Member
  • *****
  • Posts: 2253
  • Country: gb
Re: Harrogate 2015
« Reply #18 on: April 28, 2015, 05:35:21 PM »
Shame I still don't own a car. Maybe next year...

Can you not get a lift with one of the geordie generous guys from Newcastle?  :D

Be a shame to miss out...... :wave:
eccentric millionaire financed by 'er indoors
Location:  Backworth Newcastle

Skype: chippiejnr

Offline Will_D

  • Hero Member
  • *****
  • Posts: 591
  • Country: ie
    • National Homebrew Club of Ireland
Re: Harrogate 2015
« Reply #19 on: April 29, 2015, 03:21:49 AM »
Remember: Photos or it didn't happen!
Engineer and Chemist to the NHC.ie
http://www.nationalhomebrewclub.ie/forum/

Offline S. Heslop

  • Hero Member
  • *****
  • Posts: 1147
  • Country: gb
  • Newcastle Upon Tyne
Re: Harrogate 2015
« Reply #20 on: April 29, 2015, 11:58:53 AM »
Shame I still don't own a car. Maybe next year...

Can you not get a lift with one of the geordie generous guys from Newcastle?  :D

Be a shame to miss out...... :wave:

Can't imagine anyone would want to be trapped in a car with me for more than an hour!

I wouldn't have the money to really make use of Harrogate though.

Offline Ginger Nut

  • Full Member
  • ***
  • Posts: 232
Re: Harrogate 2015
« Reply #21 on: April 29, 2015, 09:04:59 PM »
I' chucking a huffy  :( bit to far for me. Don't forget drooling  :drool: :drool:  :worthless: for us sad cases

Have a top day/weekend gents.

Offline millwright

  • Full Member
  • ***
  • Posts: 247
  • Country: gb
  • Leeds West Yorshire
Re: Harrogate 2015
« Reply #22 on: April 30, 2015, 04:22:53 PM »
So its 12 at the ARC stand then and not the big window this year?

John

Offline backofanenvelope

  • Jr. Member
  • **
  • Posts: 70
  • Country: gb
    • !5 Minute Modeller
Re: Harrogate 2015
« Reply #23 on: May 01, 2015, 02:28:22 AM »
Shame as just down the road for me but I will be away when this is on so will have to be next year for me, which will also give me the chance to save up some pennies for then. :)
*** Master Guild of Procrastinators ***

Offline sbwhart

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3522
  • Country: gb
  • Smile, Be Happy, Have Fun and Rock Until you Drop
Re: Harrogate 2015
« Reply #24 on: May 02, 2015, 01:55:03 AM »
Six of us going from Crewe "Men in Sheds" on the Friday. The meeting place for the last few years has been by the big window at the back of the main entrance hall (plenty of room there) at 12 noon, but if anyone else going on Friday wants to use an alternative, that will be fine by us.
I will have to sort through my end mills for John to play with. :palm:

Cheers Dek.  :med:

Looks like it will be a Crewe invasion on Friday.

Its Friday for me to

Stew
A little bit of clearance never got in the road
 :wave:

Location:- Crewe Cheshire

Offline Deko

  • Sr. Member
  • ****
  • Posts: 253
  • Country: england
Re: Harrogate 2015
« Reply #25 on: May 02, 2015, 11:19:59 AM »
Sorry Stew, but the "men in sheds" have changed the date that we are going to Saturday. Vote was 4 for Saturday, 1 for Friday, and I didn't mind either way. So Saturday it is.

Cheers Dek. :med:

P.S. I don't know where John S will be doing his demo, but I have a feeling it may get a little crowded around mid day, so may be best to meet for a chat by the big window again. I will go with the flow.

Offline philf

  • Hero Member
  • *****
  • Posts: 869
  • Country: gb
Re: Harrogate 2015
« Reply #26 on: May 02, 2015, 12:46:30 PM »
I can't go to Harrogate this year despite being offered a lift on Saturday.

We're off caravanning in mid-Wales for the week and to say that we'll go a day later so that I can go wouldn't be a wise move. We'll have no internet, no electricity and only a feeble mobile phone signal if we climb to the highest point of the site - just a beautiful setting and the chance of catching the odd sea bass.

Last year only two of us actually managed to meet up by the big window.

I hope it's a bit better than last year - a few of the bigger trade stands were missing and I only managed to part company with about 15 for a Myford faceplate (bargain at 10) and some blocks of glass filled nylon (still where I put them when I got home).

It cost more than that in fuel and to get in.

Maybe next year.

Phil.
Phil Fern
Location: Marple, Cheshire

Offline krv3000

  • Hero Member
  • *****
  • Posts: 2081
  • Country: gb
Re: Harrogate 2015
« Reply #27 on: May 03, 2015, 06:23:07 AM »
Hi all I will be there with john and Mick  :)  :)

Offline S. Heslop

  • Hero Member
  • *****
  • Posts: 1147
  • Country: gb
  • Newcastle Upon Tyne
Re: Harrogate 2015
« Reply #28 on: May 04, 2015, 06:27:13 PM »
Looks like I will be able to go. John (doubleboost) kindly offered a lift but I mentioned the show to my grandad and he seemed real interested, so my dad offered to lift us both down. I'll be heading down on Saturday.

Hopefully I'll be able to find you all. Still gonna be "the big window at the back of the main entrance hall at 12 noon"?

Offline Pete W.

  • Hero Member
  • *****
  • Posts: 805
  • Country: gb
Re: Harrogate 2015
« Reply #29 on: May 05, 2015, 03:55:44 AM »
Hi there, all,

I hope that you all had a good time at the show, BUT   :worthless: 
Best regards,

Pete W.

If you can keep your head when all about you are losing theirs, you haven't seen the latest design change-note!

Offline philf

  • Hero Member
  • *****
  • Posts: 869
  • Country: gb
Re: Harrogate 2015
« Reply #30 on: May 05, 2015, 04:06:22 AM »
Hi there, all,

I hope that you all had a good time at the show, BUT   :worthless:

Hi Pete,

You're a bit premature - the show is next weekend!

Phil.
Phil Fern
Location: Marple, Cheshire

Offline Deko

  • Sr. Member
  • ****
  • Posts: 253
  • Country: england
Re: Harrogate 2015
« Reply #31 on: May 05, 2015, 07:55:42 AM »
Lots of talk on here about meeting John S on the Arc Euro stand at 12 noon. Well if past shows are anything to go by, any of the stands are very crowded at that time of day, that's why for the last few years the favourite meeting place has been by the big window. No stands there so plenty of room to natter without being in anybody's way. I would think John would rather deal with us a few at a time spread over the whole day rather than descend on him mob handed. Just my take on the subject, maybe John will have his own ideas.

Cheers Dek.

Offline Stilldrillin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4917
  • Country: gb
  • Staveley, Derbyshire. England.
Re: Harrogate 2015
« Reply #32 on: May 05, 2015, 09:25:07 AM »
the favourite meeting place has been by the big window. No stands there so plenty of room to natter without being in anybody's way.
Cheers Dek.

Got to agree with you, Dek.  :thumbup:

The big window would be more convenient. If we have the promised numbers attending........

David D
David.

Still drilling holes... Sometimes, in the right place!

Still modifying bits of metal... Occasionally, making an improvement!

Offline Pete W.

  • Hero Member
  • *****
  • Posts: 805
  • Country: gb
Re: Harrogate 2015
« Reply #33 on: May 05, 2015, 10:18:07 AM »
Hi there, Phil,

Hi there, all,

I hope that you all had a good time at the show, BUT   :worthless:

Hi Pete,

You're a bit premature - the show is next weekend!

Phil.

Well, oops and a red face this end, I'd assumed that the show would be the Bank Holiday weekend.

It would still be good if we non-attenders could enjoy the event at second hand via some photos from those who do go. 
Best regards,

Pete W.

If you can keep your head when all about you are losing theirs, you haven't seen the latest design change-note!

Offline John Rudd

  • Hero Member
  • *****
  • Posts: 2253
  • Country: gb
Re: Harrogate 2015
« Reply #34 on: May 05, 2015, 01:23:29 PM »

Got to agree with you, Dek.  :thumbup:

The big window would be more convenient. If we have the promised numbers attending........

David D

Ok, got my tickets....( yup 'Er indoors is coming.....so roll out the Red carpet..... :lol:)

So we meeting at the big window.....errr....just remind me where that is please.....ain't been for several years....

See you there..... :wave:
eccentric millionaire financed by 'er indoors
Location:  Backworth Newcastle

Skype: chippiejnr

Offline Stilldrillin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4917
  • Country: gb
  • Staveley, Derbyshire. England.
Re: Harrogate 2015
« Reply #35 on: May 05, 2015, 02:03:38 PM »
John.

In through the main entry door. Head straight across the room....... Big window.  :thumbup:

David D
David.

Still drilling holes... Sometimes, in the right place!

Still modifying bits of metal... Occasionally, making an improvement!

RobWilson

  • Guest
Re: Harrogate 2015
« Reply #36 on: May 05, 2015, 03:13:30 PM »

So we meeting at the big window.....errr....just remind me where that is please.....ain't been for several years....

See you there..... :wave:


Just look for the big glass opening in the wall John .  :)



Rob  :lol:



Offline John Rudd

  • Hero Member
  • *****
  • Posts: 2253
  • Country: gb
Re: Harrogate 2015
« Reply #37 on: May 05, 2015, 03:17:25 PM »

So we meeting at the big window.....errr....just remind me where that is please.....ain't been for several years....

See you there..... :wave:


Just look for the big glass opening in the wall John .  :)
Rob  :lol:


Hmmm...guess I walked into that one..
eccentric millionaire financed by 'er indoors
Location:  Backworth Newcastle

Skype: chippiejnr

RobWilson

  • Guest
Re: Harrogate 2015
« Reply #38 on: May 05, 2015, 03:44:15 PM »
 :) :thumbup:


Rob

Offline Bluechip

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 1506
  • Country: england
  • Derbyshire UK
Re: Harrogate 2015
« Reply #39 on: May 05, 2015, 05:50:08 PM »
John.

In through the main entry door. Head straight across the room....... Big window.  :thumbup:

David D

If you find yourself outside, you've gone too far ....  :thumbup:

Dave
I have a few modest talents. Knowing what I'm doing isn't one of them.

Offline Ginger Nut

  • Full Member
  • ***
  • Posts: 232
Re: Harrogate 2015
« Reply #40 on: May 05, 2015, 11:26:44 PM »
I've seen a very short video this morning of Doubleboost John with his video camera sun was shinning.

I had no idea you guys had a long weekend  :thumbup: my Aunt told me.

Offline John Rudd

  • Hero Member
  • *****
  • Posts: 2253
  • Country: gb
Re: Harrogate 2015
« Reply #41 on: May 09, 2015, 10:25:31 AM »
Well some of us met at 12 as agreed..... :wave:
Good to meet John Doubleboost at last....., Mick Toon and Bob krv3000, Bluechip and Stilldrillin.....and one or two others I didn't quite catch the names of.....


As to the show itself, I was dis-appointed by the distinct lack of traders again....College Engineering, Noggin End and Proops were missing, probably other regulars that I can't think of....

The Chester stand lacked a few of their offerings only to be be outshone by Warco.....

Finally made my mind up and ordered the GH550 from Warco after haggling (thanks to 'ER indoors intervening..) for some freebies...

Would I go again next year? Not sure probably not....I think internet shopping is the main reason why there's a reduction in trade support....

Anyone else want to share their thoughts of the experience?
eccentric millionaire financed by 'er indoors
Location:  Backworth Newcastle

Skype: chippiejnr

Offline awemawson

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 6866
  • Country: gb
  • East Sussex, UK
Re: Harrogate 2015
« Reply #42 on: May 09, 2015, 11:43:05 AM »
Exhibition organisers are now charging an arm and a leg for stalls. Add that to the fact that small traders with limited staff have to close their conventional outlet during an exhibition, and the result is many don't find attending commercially viable.
Andrew Mawson
East Sussex

Offline Deko

  • Sr. Member
  • ****
  • Posts: 253
  • Country: england
Re: Harrogate 2015
« Reply #43 on: May 09, 2015, 12:00:43 PM »
John Rudd, I was one of the others that you didn't catch the name of. Dave (stilldrilling) and Dave (bluechip) and myself had been chatting for quite a while before you and the others arrived.

Cheers Dek. :med:

Offline S. Heslop

  • Hero Member
  • *****
  • Posts: 1147
  • Country: gb
  • Newcastle Upon Tyne
Re: Harrogate 2015
« Reply #44 on: May 09, 2015, 01:01:07 PM »
Just got back. Unfortunately arrived an hour later after suffering roadworks all the way down and then getting lost in the town center for a while, so I didn't get to find anyone.

Offline millwright

  • Full Member
  • ***
  • Posts: 247
  • Country: gb
  • Leeds West Yorshire
Re: Harrogate 2015
« Reply #45 on: May 09, 2015, 02:52:59 PM »
John Rudd, I was one of the others chatting with Still drilling and Blue Chip, Nice To meet John  (Doubleboost), Bob (Krv3000), Micktoon, and Deko, hope you all got home ok.

John

Offline appletree

  • Full Member
  • ***
  • Posts: 185
Re: Harrogate 2015
« Reply #46 on: May 09, 2015, 03:22:00 PM »
It is rather concerning the absence of exhibitors, the models are very nice of course but offers from traders help justify the expense of the cost of travelling, more people than you think are not there also many stands are reduced in size. I fully understand the business costs and pressures, from memory these traders were absent from previous years and no doubt more, Chronos, Proops, Transwave, Arceurotrade, reeves, Camden, Rotogrip and no doubt many more.  In my opinion the solution has to lie with the organisers, everyone is in business to make a profit but if things carry on in this fashion there will not be a show to go to. Obviously the cost associated with putting on a show are huge but so are the rewards with admission at 9/10 a head there needs to be a bit of transparency and some straight talking. Not knocking anybody but it would be a shame to see the show fold, up until recently there was a Kit Car show at Newark however it ceased to be viable and sadly is no more.   

Offline John Rudd

  • Hero Member
  • *****
  • Posts: 2253
  • Country: gb
Re: Harrogate 2015
« Reply #47 on: May 09, 2015, 03:27:54 PM »
Millwright, Deko,

My apologies if  I appeared ignorant of your being there......nothing further from my kind of meeting and greeting fellow forum members...

Me too, hope you all arrived home safe n sound ....
eccentric millionaire financed by 'er indoors
Location:  Backworth Newcastle

Skype: chippiejnr

Offline micktoon

  • Hero Member
  • *****
  • Posts: 797
  • Country: gb
Re: Harrogate 2015
« Reply #48 on: May 09, 2015, 04:37:38 PM »
Hi, lads, I can report that the Geordie  lads all got home safe and sound after a good day at the show, hope you all did too. It was nice to put faces to names  :thumbup: .
 We were discussing the lack of traders and general slow decline of the show too, its still worth going but for how many more years ?  Sad that the cost of the stands seems to be stopping sellers attending.
  I had good day and plenty banter and a few bits and bob got for the workshop.

Cheers Mick

Offline doubleboost

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 1618
  • Country: gb
  • Newcastle Upon Tyne
Re: Harrogate 2015
« Reply #49 on: May 09, 2015, 05:41:25 PM »
Like Mick said shame the trade stalls are decreasing
I had good day
Bought a couple of items
Put names to a few faces
Shot some decent video
(be in tomorrow nights production) :drool: :drool: :drool:
Johns milling cutter sharpener was very impressive
I was amazed at how many people recognised me  :jaw: :jaw:
John

Offline Stilldrillin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4917
  • Country: gb
  • Staveley, Derbyshire. England.
Re: Harrogate 2015
« Reply #50 on: May 09, 2015, 05:57:28 PM »
Well...... What a grand day!  :thumbup:

So good to meet other members. If only, briefly.

Two more names to add, John Stevenson, Frazer Heslop.

Never opened my wallet! (Thanks to a thrifty, Yorkshire upbringing).   

Though, after some negotiations in the carpark. A couple of very nice stirling engines, traveled home with us.........

Good day. Good company. Thanks Lads, (and Mrs. Rudd).  :mmr:

David D

David.

Still drilling holes... Sometimes, in the right place!

Still modifying bits of metal... Occasionally, making an improvement!

Offline Ginger Nut

  • Full Member
  • ***
  • Posts: 232
Re: Harrogate 2015
« Reply #51 on: May 10, 2015, 10:41:32 PM »
 :D Thanks John DB for the top video watched this morning :thumbup: :thumbup: :thumbup:


Offline John Stevenson

  • In Memoriam
  • Hero Member
  • *****
  • Posts: 1643
  • Nottingham, England.
Re: Harrogate 2015
« Reply #52 on: May 11, 2015, 05:08:31 AM »
Well back from the 3 days at the show and a very enjoyable time

Now the show, Really enjoyed myself, met many new people and also renewed acquaintance with many old friends. I feel that Harrogate is the best show of the year. It has an atmosphere that seems to be lacking at other shows. Plenty of room, dedicated halls with plenty of power, good hard standing parking and plenty of space for the larger models to run around outside.

I was there for one reason, if you don't count my jolly, and that was to demonstrate the end mill grinder. This was on my time, my shilling and not paid for by ARC although I did get a free meal on Saturday night so the 4 is now down to 3 wink

First off got loads on negative views ranging from it only sharpens the ends [ Yes it was ONLY designed for that in the same way a Myford lathe can't plasma cut metal ]

You can buy a lot of milling cutters for 800 [ perfectly true and if you are someone who won't use 800 worth of milling cutters in you life then a valid point and so it's not for you ] Acra Machine tools were also there with a very large and heavy industrial 14 x 40 lathe with a price tag of 8,000. That won't fit in the average 10 x 6 wooden shed with single phase but didn't stop them coming and I'll bet they didn't have anyone telling them it was too expensive ?

So once the negatives were out the way and simply discounted we got on to the serious players. I had a LOT of interest from a few clubs who soon realised they need to spend money or pay tax and the spin off is once paid for it is then a source of revenue all year and not just fine track days.

A couple of University workshops expressed an interest as did a few serious model engineers who have the foresight to look ahead. Milling cutters are never going to get cheaper and good carbide has never been cheap.

Over the weekend I sharpened a total of 232 cutters brought in by punters, split 91, 71 and 70 on the Sunday. Average commercial price for doing cutters is about 5.50 upwards.

I did many that were good cutters but commercially not viable to sharpen. One one is going to pay 5.50 to regrind a 4mm cutters costing less than this but it now has a new life.

I could have done more but a lot of time was spent repeating how it works and how to set up. I also ground 40 / 50 ? that I brought up in case I had no cutters from punters. These were not included in the total of 232.

I was never hard pushed, often had 3 or 4 people waiting but it wasn't a bind.

These were mainly HSS but probably 20% were carbide. In fact the first person on Friday rolled up with 7 carbide cutters that he gleefully told me I wouldn't be able to do anything with as they were chipped and badly broken [ nice one smiley ]

He left after about 15 minutes with 6 of them sharpened perfectly and has to come back later for the 7th as I had to grind about 8mm off it.

Worst one was an extended 1/2" cutter with about the last 5/8" badly damaged and the guy was perfectly willing to scrap this due to the damage but it survived to cut another day. I was a shame to waste a long cutter like this.

All this was done for free with donations asked for the Children's Heart Trust, a charity my daughter is involved with. No price was inferred or offered, it being left to the punter and I made a point of not even looking at what went in the collection box, most paid but some I think didn't realise there was a charity box and said thanks and walked off, not worried.

At the end of the weekend I had collected 170.89 for the charity and I'd like to take this chance to thank everyone who called round the stand, whether they brought cutters or not, for their company and support.

I'd also like to extend my thanks to the organises of the Harrogate show for the help and friendly support given.
John Stevenson

Offline krv3000

  • Hero Member
  • *****
  • Posts: 2081
  • Country: gb
Re: Harrogate 2015
« Reply #53 on: May 11, 2015, 03:15:35 PM »
hi all a bit late in the post but nice to meet follow madmodders had a brill day thanks to john and mick 

Offline Ginger Nut

  • Full Member
  • ***
  • Posts: 232
Re: Harrogate 2015
« Reply #54 on: May 11, 2015, 10:26:25 PM »
Sounds like all had a ripping time but all left camera at home except John  :lol:

Offline krv3000

  • Hero Member
  • *****
  • Posts: 2081
  • Country: gb
Re: Harrogate 2015
« Reply #55 on: May 16, 2015, 06:37:57 PM »
lol had me camera just to biz looking at all the booty and the tools to

Offline krv3000

  • Hero Member
  • *****
  • Posts: 2081
  • Country: gb
Re: Harrogate 2015
« Reply #56 on: May 18, 2015, 05:49:50 PM »
hi I rely enjoyed the event but I was hoping to get sum broken D.T.Is for more post on haw to fix them

Offline Stilldrillin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4917
  • Country: gb
  • Staveley, Derbyshire. England.
Re: Harrogate 2015
« Reply #57 on: May 18, 2015, 06:02:54 PM »
Sounds like all had a ripping time but all left camera at home except John  :lol:

One of the Steamtoys members, was there. And, he knows how to work a camera........ http://modelsteam.myfreeforum.org/about82005.html

David D
David.

Still drilling holes... Sometimes, in the right place!

Still modifying bits of metal... Occasionally, making an improvement!

Offline vtsteam

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 5417
  • Country: us
  • Republic of Vermont
    • www. sredmond.com
Re: Harrogate 2015
« Reply #58 on: May 19, 2015, 08:46:46 AM »
Great photos! I particularly liked the little blue steam roller and the steam motorcycle.... :beer:
I love it when a Plan B comes together!
Steve
www.sredmond.com

Offline Bluechip

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 1506
  • Country: england
  • Derbyshire UK
Re: Harrogate 2015
« Reply #59 on: June 03, 2015, 01:53:15 PM »

Finally made my mind up and ordered the GH550 from Warco after haggling (thanks to 'ER indoors intervening..) for some freebies...


Have you got it then ??? Shows as 'No Stock' on the Warco site.

Dave
I have a few modest talents. Knowing what I'm doing isn't one of them.

Offline John Rudd

  • Hero Member
  • *****
  • Posts: 2253
  • Country: gb
Re: Harrogate 2015
« Reply #60 on: June 03, 2015, 02:58:12 PM »
Dave,
After hearing about the experiences of someone who had a WM series machine back to Warco for repair to the tune of 200 plus after just over 12 months , I decided against it and cancelled....

 Got my eye on a Chester machine now...3k with all the toys.....DRO/qctp/coolant system.... etc......hmmmmm nice...just need to find room.   :scratch:
eccentric millionaire financed by 'er indoors
Location:  Backworth Newcastle

Skype: chippiejnr

Offline Bluechip

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 1506
  • Country: england
  • Derbyshire UK
Re: Harrogate 2015
« Reply #61 on: June 04, 2015, 04:00:52 AM »
Ah! What  a bummer ...  :(   Looks a nice purposeful machine too ...

Far too posh for the likes of me of course ....  :lol:

Dave
I have a few modest talents. Knowing what I'm doing isn't one of them.