Author Topic: What collet system ??  (Read 3737 times)

Offline ksor

  • Sr. Member
  • ****
  • Posts: 316
  • Turn off the TV - life ain't replayed !
    • Keld's hjemmeside
What collet system ??
« on: May 30, 2015, 08:45:54 AM »
I have a holder for some - to me - unknown collet system ! :scratch:

It has a number stamped on it: LAIP 04 0101 0505

I can't find anything on that number on the internet and I have tried a ER32 collet in the holder and it's NOT a ER32 ! :bang: :bang: :bang:

What is it then ?

More details here in danish but you can Google Translate to the right just under the menu line - choose whatever language you like in the combobox:

http://kelds.weebly.com/generelt-spaeligndetang-system.html
Best regards
KSor, Denmark
Skype name: keldsor

Offline awemawson

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 6516
  • Country: gb
  • East Sussex, UK
Re: What collet system ??
« Reply #1 on: May 30, 2015, 09:46:20 AM »
Try the TG series of collets - possibly a TG100 or TG150

Andrew Mawson
East Sussex

Offline ksor

  • Sr. Member
  • ****
  • Posts: 316
  • Turn off the TV - life ain't replayed !
    • Keld's hjemmeside
Re: What collet system ??
« Reply #2 on: May 30, 2015, 11:05:47 AM »
THX for the massive and quick response !

Someone found the exact number !

It's an DIN 6388 = OZ 25 = 462E = ISO 10897

So now I'll try buy 1 or 2 collets to see if it fits !

Thx for your time !
« Last Edit: May 30, 2015, 02:56:40 PM by ksor »
Best regards
KSor, Denmark
Skype name: keldsor

Offline PekkaNF

  • Hero Member
  • *****
  • Posts: 2125
  • Country: fi
Re: What collet system ??
« Reply #3 on: May 30, 2015, 12:10:03 PM »
Hello

I Have LAIP 0401010405 It is MT3 holder for DIN6388 collets

There are several OD diameters on this collet system, like ER 25/32 etc.

I have some collets, like these fits, but have differents marrkings

 20 mm collet DIN6388B EOC25B.D20 and marking on collet 20 - 19,5 this has 12 slits

12 mm 6 slit collet (only one diamter, no range) LAIP 020 1051200

OD max dia is 35 mm and length 52 mm

Pekka


Offline ksor

  • Sr. Member
  • ****
  • Posts: 316
  • Turn off the TV - life ain't replayed !
    • Keld's hjemmeside
Re: What collet system ??
« Reply #4 on: May 30, 2015, 02:59:08 PM »
Hello

I Have LAIP 0401010405 It is MT3 holder for DIN6388 collets

There are several OD diameters on this collet system, like ER 25/32 etc.

I have some collets, like these fits, but have differents marrkings

 20 mm collet DIN6388B EOC25B.D20 and marking on collet 20 - 19,5 this has 12 slits

12 mm 6 slit collet (only one diamter, no range) LAIP 020 1051200

OD max dia is 35 mm and length 52 mm

Pekka

Ofcause I have to stick to the "models" that fit my holder LAIP 04 0101 0505 with "holding"-diameters 2 (or 3) to 25mm
Best regards
KSor, Denmark
Skype name: keldsor

Offline PekkaNF

  • Hero Member
  • *****
  • Posts: 2125
  • Country: fi
Re: What collet system ??
« Reply #5 on: May 30, 2015, 03:13:14 PM »
What I'm saying that there are many sizes of these DIN collets

Probably 002 01 05 in LAIP markings.

Here is a caalog you can check in few pages:
www.laip.es/files/Downloads/PINZAS.pdf

I like them, they have an very exact feel and usem them only good mills. No point of chucking worn/bad bits in them.

Pekka

Offline ksor

  • Sr. Member
  • ****
  • Posts: 316
  • Turn off the TV - life ain't replayed !
    • Keld's hjemmeside
Re: What collet system ??
« Reply #6 on: May 30, 2015, 03:15:08 PM »
What I'm saying that there are many sizes of these DIN collets

Probably 002 01 05 in LAIP markings.

Here is a caalog you can check in few pages:
www.laip.es/files/Downloads/PINZAS.pdf

I like them, they have an very exact feel and usem them only good mills. No point of chucking worn/bad bits in them.

Pekka

Yeah, someone send it to me  :)
Best regards
KSor, Denmark
Skype name: keldsor